Advertisement
INSTALLATION INSTRUCTIONS
Base Mount Instructions
(1) Select and draw a reference position on the ceiling using the mounting sticker template.
(2) Drill one hole on the position selected, and insert the plastic anchor into the hole.
(3) Put cables through bracket hole and leave some line long enough to connect.
(4) Fix the bracket on the ceiling with 3pcs PA4x15 screws (EIR48X) / 4pcs PA6x15 screws (EIR56X).
Adjustments
To turn the camera 360° and adjust picture's horizontal position, adjust screw (1). To turn bracket 360°, adjust screw (3). To move the camera 90° vertically, adjust
screw (2) and screw (3).
FCC NOTICE:
This equipment has been tested and found to comply with the limits for a class A digital device, pursuant to part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates radio frequency,
and if not installed and used in accordance with the instruction manual, may cause harmful interference.
Copyright © 2009. All Rights Reserved.
REV033010
2
EIR48X-42VF_I-303
EIR56x-42vf515_I-304
Advertisement
