Goldmund METIS 30 User Manual page 20

7 SETTINGS (Ctd.)
To access the player's Setup Menu simply press the SETUP button on the remote
control. Since some Setup Menu options can become inaccessible when the player
is playing a disc, it is recommended that you operate the Setup Menu when playback
is fully stopped or when there is no disc in the player.
1. Press the SETUP button on the remote control
2. Press the UP/DOWN ARROW buttons to select the section. There are 6
sections: Playback Setup, Video Setup, Audio Format Setup, Audio Processing,
Device Setup, and Network Setup. Press the ENTER button or the RIGHT
ARROW button to enter the selected section.
3. Press the UP/DOWN ARROW buttons to select the setup item to be changed,
and press the ENTER or RIGHT ARROW button to change the setting. When the
scroll icon is shown at the top or bottom of the Setup Menu, it indicates that there
are more menu items that can be accessed by scrolling with the UP/DOWN
ARROW buttons. For example, in the Playback Setup section, you may use the
UP/DOWN ARROW buttons to select the "PIP Mark" setup item, and press the
ENTER button to change the "PIP Mark" setting.
4. To select a value from the list of available settings, press the UP/DOWN
ARROW buttons and then press the ENTER button to confirm.
For example, to select "Off" for "PIP Mark", use the UP/DOWN ARROW buttons to
highlight the "Off" selection and press the ENTER button.
5. To exit the SETUP menu at any time, press the SETUP button on the remote
control or select Exit from the Setup Menu sections.
The settings are permanently saved when the player is turned off using either the
front panel power button or the remote control. If the AC power is interrupted before
the player enters standby status, the settings will not be saved. To ensure proper
saving of the SETUP menu settings, please turn off the player and turn it back on
after you make major changes to the SETUP menu options.
GOLDMUND METIS 30 – Universal Player - 20