Do you have a question about the AIR GOMETER and is the answer not in the manual?
Questions and answers
Jean
May 27, 2025
Need service person to perform maintence on do air gometer
1 comments:
Mr. Anderson
May 27, 2025
To find a service person for maintenance on a DP AIR GOMETER, contact Customer Service at 1-800-633-5730 or write to:
Diversified Products Corporation P.O. Box 100 Opelika, AL 36803 Attn: Customer Service
You must have the serial number of the equipment ready.
This answer is automatically generated
Amanda
March 19, 2025
I came across a DP Air Gometer but the electronic monitor does not work. Is it supposed to be plugged into an outlet or battery operated. Thank you!
1 comments:
Mr. Anderson
March 19, 2025
The DP Air Gometer is battery operated and requires "AA" alkaline batteries.
This answer is automatically generated
Peggy L Jenkins
February 17, 2025
? In the Airgomter Manual, page 12, Part 121 are bearings..where can I find these replacement parts?
1 comments:
Mr. Anderson
February 17, 2025
You can find replacement bearings for the DP Air Gometer at [http://www.fitnessrepairparts.com](http://www.fitnessrepairparts.com) under the category for bushings and bearings.
This answer is automatically generated
Dolly Steffen
February 6, 2025
How do you change the tension on a Bionix DP air gometer stationary bike
1 comments:
Mr. Anderson
February 10, 2025
You can change the tension on a DP Air Gometer stationary bike by increasing the speed of your leg and/or arm movements. The bike uses an air resistance system, so the faster you move, the greater the resistance.
This answer is automatically generated
David H DeAngelo
January 26, 2025
I recently acquired an old Air gometer The electronics are corroded and unusable Recently I have had knee replacement surgery I would like to change the pedal resistance How to i do this??
1 comments:
Mr. Anderson
February 10, 2025
The DP Air Gometer uses an air resistance system, meaning the resistance changes based on the speed of pedaling. To increase the workout intensity, pedal faster with your legs and/or move your arms more quickly. There is no manual resistance adjustment; resistance increases naturally with speed.
This answer is automatically generated
Janner
January 20, 2025
How do I fix a slipping chain on our automated? Not a popping noise, just slips. We have tightened screws as shone in Fig 2.
1 comments:
Mr. Anderson
February 4, 2025
To fix a slipping chain on a DP AIR GOMETER:
1. Remove SCREWS (No. 133 & 110), FAN GUARD (No. 136), and SCREWS (No. 109 & 130) to loosen the CHAINGUARDS (No. 126 and 127). 2. Loosen the LOCKNUTS (No. 115). 3. Tighten the NUTS (No. 118) to adjust the RETAINERS (No. 113) so they are equidistant from the FRAME (No. 105) and all slack is removed from the CHAIN (No. 119). 4. Replace the FAN GUARD (No. 136) and all screws (Nos. 133, 110, 109, and 130).
Need help?
Do you have a question about the AIR GOMETER and is the answer not in the manual?
Questions and answers
Need service person to perform maintence on do air gometer
To find a service person for maintenance on a DP AIR GOMETER, contact Customer Service at 1-800-633-5730 or write to:
Diversified Products Corporation
P.O. Box 100
Opelika, AL 36803
Attn: Customer Service
You must have the serial number of the equipment ready.
This answer is automatically generated
I came across a DP Air Gometer but the electronic monitor does not work. Is it supposed to be plugged into an outlet or battery operated. Thank you!
The DP Air Gometer is battery operated and requires "AA" alkaline batteries.
This answer is automatically generated
? In the Airgomter Manual, page 12, Part 121 are bearings..where can I find these replacement parts?
You can find replacement bearings for the DP Air Gometer at [http://www.fitnessrepairparts.com](http://www.fitnessrepairparts.com) under the category for bushings and bearings.
This answer is automatically generated
How do you change the tension on a Bionix DP air gometer stationary bike
You can change the tension on a DP Air Gometer stationary bike by increasing the speed of your leg and/or arm movements. The bike uses an air resistance system, so the faster you move, the greater the resistance.
This answer is automatically generated
I recently acquired an old Air gometer The electronics are corroded and unusable Recently I have had knee replacement surgery I would like to change the pedal resistance How to i do this??
The DP Air Gometer uses an air resistance system, meaning the resistance changes based on the speed of pedaling. To increase the workout intensity, pedal faster with your legs and/or move your arms more quickly. There is no manual resistance adjustment; resistance increases naturally with speed.
This answer is automatically generated
How do I fix a slipping chain on our automated? Not a popping noise, just slips. We have tightened screws as shone in Fig 2.
To fix a slipping chain on a DP AIR GOMETER:
1. Remove SCREWS (No. 133 & 110), FAN GUARD (No. 136), and SCREWS (No. 109 & 130) to loosen the CHAINGUARDS (No. 126 and 127).
2. Loosen the LOCKNUTS (No. 115).
3. Tighten the NUTS (No. 118) to adjust the RETAINERS (No. 113) so they are equidistant from the FRAME (No. 105) and all slack is removed from the CHAIN (No. 119).
4. Replace the FAN GUARD (No. 136) and all screws (Nos. 133, 110, 109, and 130).
This answer is automatically generated
where can i find replacement socket bearings
Can I adjust the pedal tension