The WL510 has a two core power cable with a Red (+12v) and Black (-0v) wire. Be very careful to ensure that the correct supply voltage polarity is connected to the WL510, as reverse polarity will damage the unit.
Page 3
If you wish to connect it to a Wireless Router please skip to section 4. The WL510 acts as a DHCP server on its LAN connection and will allocate an IP address to any PC connected to it, so it is important that your PC is set to “Obtain an IP address automatically”...
Page 4
“Output Power”. Output Power – This slider is used to manually adjust the power output of the WL510 Once the above settings are configured click the “Change” button and then click the “Apply” button that will appear at the...
Page 5
You can now log out from the WL510 web connection or simply navigate to another webpage on the internet. Although the WL510 does have many other settings, in reality, these are very rarely needed and for simplicity are not covered by this Quick Start Guide.