Table of Contents: Welcome! How to Charge Conversor Pro Setting up Conversor Pro for the First Time Make Sure Your Hearing Instrument is/are Working Setup the Microphone Using the zoom and Omni-Directional functions Setting up Receiver To use the Receiver on its own...
Welcome! Thank you for your purchase of Conversor Pro, one of the most versatile and enabling Assistive Listening Devices available on the market that greatly enhances the clarity of sound received by your Hearing Instrument(s) in a variety of everyday situations.
Page 5
Neck Cord Padded Carry Case Used together with your Hearing Instrument(s), Conversor Pro will greatly improve your ability to hear, select and focus on a particular sound. You simply point the Microphone Transmitter towards, or place it close to, the sound that you wish to hear. The Pendant Receiver is worn at all times during use around your neck, either above or beneath clothing.
How to Charge Conversor Pro: 1. Attach the correct mains adaptor to the charger 2. Attach to the Microphone and Receiver using the dual socket Plug into mains socket and charge according to the instructions below. 4. The lights on the...
Setting up Conversor Pro for the First Time Please ensure that the Microphone and the Receiver are fully charged (see page 6). 1. Make sure your hearing instrument is working Switch your Hearing Instrument to the Telecoil Mode. (See your Hearing Instrument User Guide or Consult your Audiologist.)
ON/OFF by pressing the bottom button 4. Independent Microphone The Conversor Pro receiver has a green light when it is “paired” correctly with the transmitter If the light goes Red, the battery is low and operation may stop within the hour. If the receiver’s light is half Red...
When Conversor Pro Microphone is set to the Omni-Directional setting, you will not yet experience the full benefit of Conversor Pro, but this procedure will help you to match the sound level of the Conversor Pro with your hearing instrument.
Page 10
Sockets and Connections – Microphone The Conversor Pro Microphone can be connected to other audio devices as described below. The following Accessories are included in your package. Additional units can be purchased by contacting your Distributor, or Conversor Limited. 1. Connecting to Radio or 2.
Page 11
Televisions, Sky and Cable boxes. By connecting the Scart Adaptor with the Phono Cables to The Conversor Pro Microphone, connection to the device is made simple and it allows other to listen to the device as well.
Page 12
Sockets and Connections – Receiver The Conversor Pro Receiver can also be used with an earpiece or binaural headphones instead of using your Hearing Instrument, as described below. Simply plug the ear piece or headphones jack into the socket located on the bottom of The Conversor Pro Receiver.
Page 13
Slide up to release Battery cover The Neck Cord allows the speaking companion to wear The Conversor Pro Microphone around his or her neck for hands-free convenience and greater mobility during conversation, such as in the car. The Neck Cord is attached to The Conversor Pro Microphone by slipping it onto the tab on the back of the Microphone, as shown above.
• Do not attempt to open either The Conversor Pro Microphone or Receiver casing (other than the battery compartment to change the battery). They contain no user-serviceable parts. Opening either unit will invalidate the Manufacturer’s Warranty...
Changing the Battery Lithium batteries are available from your distributor or audiologist, and they can replace them for you. You can also change them yourself, following these instructions: Transmitter Receiver 1. Slide open the battery cover. 2. Remove the existing battery. 3.
The inside of a moving car can be a noisy environment, creating listening problems for wearers of hearing instruments. Whether you are the driver or a passenger, Conversor Pro enables you to hear your driving companion(s) clearly, even as a backseat passenger. AT A FAMILY PARTY, MEAL, DINNER...
Page 17
WATCHING TELEVISION Watching on your own Watching with another person With Conversor Pro there is no need to purchase a separate TV Amplifier or Room Loop. Use Conversor Pro to watch comfortably at home or away. (1) Watching on your own: Place the Microphone...
Page 18
Held in your hand Placed near or worn by the speaker Conversor Pro has been designed to give you the ability to listen to speakers clearly from a distance. There are two ways to achieve this: (1) Hold the Microphone in your hand and point it at the sound source up to 15 metres away.
Page 19
OUT SHOPPING With a shop Assistant With a family member or friend Place the Microphone on the countertop to hear the shop assistant clearly. Or, if you have a child or family member who is Hearing Impaired, you wear the Microphone and your hearing impaired companion wears the Receiver.
Page 20
ONE-TO-ONE CONVERSATION Remote conversation Single conversations between rooms in a group At home, most couples do not spend all their time together in the same room. Have your companion wear the Microphone using the Neck Cord supplied. By wearing your Receiver, you will hear the other person with clarity, and be able to converse at comfortable levels despite being in different rooms.
Poor range and interference: Conversor Pro has been designed for optimum sound quality and range. In certain environments consisting of iron / steel or metalwork frames, the range can be reduced.
Manufacturer’s Warranty The manufacturer, Conversor Limited, issues a two-year limited warranty to the original consumer of this product. This warranty will go into effect upon the date of original purchase of this equipment, and shall remain in effect for two calendar years from that date.
Statements of Compliance & Conformity Conversor Pro is intended to be FCC ID: QA6CONVERSOR-PRO used as an Assistive Listening IC: 5529A-CONVERPRO Device by persons who are hard of This device complies with Part 15 of the hearing. FCC Rules. Operation is subject to the...
Need help?
Do you have a question about the Pro and is the answer not in the manual?
Questions and answers