Advertisement
Quick Links
OWNERS MANUAL
Manufacturer: Zhejiang Kingroma Industrial & Trading CO. ,LTD.
Address:NO.1 Baihe Road, Baihuashan Industrial Area, Wuyi, Zhejiang China
Please note that this is a general manual. So, the style of the 2-wheelers
that you have may differ from the picture shown in this manual.
Original instructions
Please read this owner's manual carefully before using this product ! This is most important !
Please read this owner's manual carefully! It's good for driver's safety and vehicle's
maintenance!
If the rider is without safety awareness or driving experiences, please do drive under
the adult's supervision! This is most important! It's very important for your safety.
This product is recommended for riders of 16 years old or over.
Do not lend the vehicle to others who don't know how to operate.
Please observe the local law and regulations.
Content
! Safety warning
! Compliance with the law
! Assembling
! The position of the VIN
! Key switch
! Function switch
! Charger
! Emergency turn off stop switch
! Burglar Alarm
! Tire and Tire pressure gauges
! Operating
Inspection before riding
-Idling (inspection)
-Front ,rear suspension (inspection)
-Front brake system(inspection)
-Rear brake system(inspection)
-Battery (inspection)
-Tool bag(inspection)
-Self-Protection(inspection)
! Starting
! Training
! Riding
! Parking
! Cleaning
! Storage
! Transport
! Delivery
! Maintenance & accessories
! Accessory description, data, circuit diagram, age warning and warning labels.
Advertisement
Summary of Contents for Zhejiang Kingroma KXD series
-
Page 1: Owners Manual
-Rear brake system(inspection) -Battery (inspection) -Tool bag(inspection) -Self-Protection(inspection) ! Starting ! Training ! Riding Manufacturer: Zhejiang Kingroma Industrial & Trading CO. ,LTD. ! Parking ! Cleaning Address:NO.1 Baihe Road, Baihuashan Industrial Area, Wuyi, Zhejiang China ! Storage ! Transport ! Delivery ! Maintenance &... - Page 2 step: Please install rear shock absorbers, and tighten nuts on both sides with 25N.m force. step: Please install the front tires (make the tread pattern and cycle valve outside),and tighten nuts with Safety warning force between 35N.m ~ 45N.m. 1. This vehicle is not a toy. step: Please install handlebar (adjust to proper angles), and tighten nuts with force between 15N.m ~ 2.
- Page 3 "ON” condition: Key can not be taken out. When engine is being started, headlight can be turned on (if Measure method Unscrew valve cap then press it toward the valve cap with tire gauge. The measured headlight available). value is tie pressure. Put back the valve cap and screw it after measuring. . Function Switch Functional switch is in left side of handlebar, which consists of horn, start, headlight, flame-out function.
- Page 4 clothing correctly to ensure your safety. 4. Release the throttle and use the brake, to make it slow down. Protective clothing consists of these parts below: 5. Make sure both the front brake and the rear brake work at the same time when braking. Never force too hard, that will reduce the working life of the brakes.
- Page 5 Necessary maintenance is the important guarantee to keep the vehicle in good condition. Please maintain the vehicle according to time list. Front brake Emergency turn off switch Engine maintenance: After every driving, please close the switch of carburetor and oil-way. Rear brake Release the rest oil.
- Page 6 FRONT/REAR TIRE LUBRICATION MODE PETROL MIXED AXLE BASE (mm) BORE×STROKES 44 37.4 PRESSURE LUBRICATE WHEEL BASE (mm) DISPLACEMENT (ml) 49.0 FRONT/REAR RIM TYPE ALLOY RIM COOLING MODE AIR-COOLED MIN GROUND CLEARANCE COMPRESSION RATE HEADLIGHT SPECIFICATION FUEL BRAND (mm) ≥90# PRIMARY REDUCTION RATIO 3.20 MIXTURE RATIO...
- Page 7 WEIGHT FULL 27.2 MAXIMUM TORQUE 2.4/5500 FURNISHMENT (Kg) N.m (r/min) RATED LOAD QUALITY (kg) CARBURETOR TYPE H117A FLOAT (PLUNGER) MAXIMUM SPEED (Km/h) CLUTH TYPE AUTOMATIC CENTRIFUGAL OIL TANK CAPACITY (L) SPARK PLUG TYPE BM6A FRONT/REAR SHOCK SPRING MUFFLER TYPE IMPEDANCE ABSORBER TYPE COMPOUND MUFFLER...
- Page 8 PRESSURE LUBRICATE Front brake Rear brake Warning plate FRONT/REAR RIM TYPE ALLOY RIM COOLING MODE AIR-COOLED HEADLIGHT SPECIFICATION FUEL BRAND ≥90# PRIMARY REDUCTION RATIO MIXTURE RATIO 1 25 Functional switch FUEL &LUBRICANT OIL FINAL REDUCTION RATIO 4.91 LWA dB(A) DRIVE RATIO 15.71 VIBRATION(m/s Rear wheel...
- Page 9 (mm) AXLE BASE (mm) BORE×STROKES 44 37.4 WHEEL BASE (mm) DISPLACEMENT (ml) 49.0 MIN GROUND CLEARANCE COMPRESSION RATE (mm) TURNING CIRCLE DIAMETER 2800 UNLOADING 2800±150 (mm) ROTATE SPEED(r/min) DRY WEIGHT (kg) RATED POWER 1.8/7000 (r/min) WEIGHT FULL 24.5 MAXIMUM TORQUE 2.4/5500 FURNISHMENT (Kg) N.m (r/min)
- Page 10 WEIGHT FULL 37.5 MAXIMUM TORQUE 3.0/4500 Front brake Functional switch FURNISHMENT (Kg) N.m (r/min) RATED LOAD QUALITY (kg) CARBURETOR TYPE PLUNGER TYPE Warning plate Rear brake MAXIMUM SPEED (Km/h) CLUTH TYPE MULTI-DISC WET CLUTCH CE plate OIL TANK CAPACITY (L) SPARK PLUG TYPE A7TC FRONT/REAR...
- Page 11 PRESSURE SPLASH TURNING CIRCLE DIAMETER 3460 UNLOADING 2800±150 (mm) ROTATE SPEED(r/min) FRONT/REAR RIM TYPE ALUMINUM RIM COOLING MODE AIR COOLED DRY WEIGHT (kg) RATED POWER 1.8/7000 HEADLIGHT FUEL BRAND ≥90# (r/min) SPECIFICATION WEIGHT FULL MAXIMUM TORQUE 2.4/5500 PRIMARY REDUCTION MIXTURE RATIO FURNISHMENT (Kg) N.m (r/min)
- Page 12 RATED LOAD QUALITY (kg) CARBURETOR TYPE H117A FLOAT-TYPE PLUNGER MAXIMUM SPEED (Km/h) CLUTH TYPE AUTOMATIC CENTRIFUGAL OIL TANK CAPACITY (L) SPARK PLUG TYPE BM6A FRONT/REAR SHOCK SPRING MUFFLER TYPE IMPEDANCE ABSORBER TYPE COMPOUND MUFFLER FRONT/REAR BRAKE TYPE DISC BRAKE STARTING MODE PULL START FRONT/REAR BRAKE BY HAND...
- Page 13 HEADLIGHT FUEL BRAND ≥90# Turn off switch Front brake SPECIFICATION Warning plate MIXTURE RATIO PRIMARY REDUCTION Rear brake RATIO FUEL &LUBRICANT OIL FINAL REDUCTION RATIO 4.91 LWA dB(A) CE plate DRIVE RATIO 13.95 VIBRATION(m/s CIRCUIT DIAGRAM Muffler Front wheel Rear wheel Engine PRODUCT NAME DIRT BIKE...
- Page 14 DRY WEIGHT (kg) RATED POWER 1.8/6000±100 Flame out switch Front brake Warning plate (r/min) THE WEIGHT OF FULL MAXIMUM TORQUE Rear brake 3.0/4500±100 FURNISHMENT (Kg) N.m (r/min) RATED LOAD QUALITY CARBURETOR TYPE PLUNGER CE plate (kg) MAXIMUM SPEED CLUTH TYPE MULTI-DISC Front wheel (Km/h)
- Page 15 HEADLIGHT SPECIFICATION FUEL BRAND DIAMETER (mm) ROTATE SPEED(r/min) ≥90# PRIMARY REDUCTION RATIO 3.20 MIXTURE RATIO OF 1 25 DRY WEIGHT (kg) 60.5 RATED POWER 4.6 7500 FUEL &LUBRICANT (r/min) THE WEIGHT OF FULL 63.5 MAXIMUM TORQUE 6.5/5500 FINAL REDUCTION RATIO 3.91 LWA dB(A) FURNISHMENT (Kg)
- Page 16 HEADLIGHT FUEL BRAND ≥90# Functional switch Front brake Warning plate SPECIFICATION 3.722 MIXTURE RATIO PRIMARY REDUCTION Rear brake RATIO FUEL &LUBRICANT OIL FINAL REDUCTION RATIO 2.93 LWA dB(A) CE plate DRIVE RATIO VIBRATION(m/s CIRCUIT DIAGRAM Front wheel Rear wheel Engine PRODUCT NAME DIRT BIKE PRODUCT MODEL...
- Page 17 DIAMETER (mm) ROTATE SPEED(r/min) Flame out switch Front brake DRY WEIGHT (kg) 60.5 RATED POWER 4.6 7500 Warning plate (r/min) Rear brake THE WEIGHT OF FULL 63.5 MAXIMUM TORQUE 6.5/5500 FURNISHMENT (Kg) N.m (r/min) CE plate RATED LOAD QUALITY CARBURETOR TYPE PLUNGER Muffler (kg)
-
Page 18: Primary Reduction Ratio
PRIMARY REDUCTION RATIO 3.722 MIXTURE RATIO FUEL &LUBRICANT OIL 2.93 LWA dB(A) FINAL REDUCTION RATIO DRIVE RATIO VIBRATION(m/s CIRCUIT DIAGRAM...