Table of Contents
Advertisement
Time programming function
This function may be used in two different ways:
to automatically switch off a hotplate.
■
as a timer.
■
Turning off a hotplate automatically
Enter the time period for the hotplate. The hotplate turns off
automatically once the time has elapsed.
How to program
Select the required hotplate and power level.
1.
Press the
0
symbol twice.
2.
function program display.
In the next 10 seconds, program the required time using
3.
symbols 1 to 9.
The cooking time starts to count.
Once the time has elapsed
The hotplate switches off once this time has elapsed. A beep is
heard and
.
appears in the hotplate and the time
‹
‹
programming function display shows
When the
symbol is pressed, the displays turn off and the
0
beep goes off.
Changing or cancelling the time
Select the hotplate and press the
The __ and
r
displays appear
Change the cooking time using symbols 1 to 9 or press 0 to
cancel the time.
Cleaning lock function
Cleaning the control panel while the hob is on may change the
settings.
In order to avoid this, the hob has a cleaning lock function.
Press the
>D
symbol. A signal sounds. The control panel is
locked for 35 seconds. The surface of the control panel can
now be cleaned without risk of changing the settings.
Note: The lock does not affect the main switch. The hob may
be switched off when desired.
‹‹ y
__ light up on the time
for 10 seconds.
‹‹
symbol twice.
0
Automatically switch off a hotplate with the deep-frying
function
When cooking using the deep-frying function, the programmed
cooking time begins to count down once the selected hotplate
reaches the desired temperature.
Notes
If a cooking time has been programmed, the display always
■
shows the time of this function. To check the cooking time
remaining in a hotplate, select a hotplate and press the
0
symbol twice.
If a time has been programmed for several hotplates, the
■
time of the selected hotplate is always shown.
Any cooking time can be programmed for up to 99 minutes.
■
Automatic timer
With this function you may select a cooking time for all
hotplates. Once a hotplate is switched on, the selected time will
begin to count down. The hotplate will automatically switch off
when the cooking time has elapsed.
Instructions on activating the timer are found in the chapter
entitled "Basic settings".
Note: The cooking time can be changed or cancelled for any
hotplate:
Press the
symbol several times until the
0
required hotplate lights up. Adjust the cooking time with
symbols 1 to 9 or deactivate with the symbol 0.
The timer
The timer can be set for periods of up to 99 minutes. It is
independent of the other settings. This function does not
automatically switch off a hotplate.
How to program
Press the
symbol. The indicator
0
1.
in the time program function display.
Set the required time using symbols 1 to 9.
2.
The time starts again after a few seconds.
Once the time has elapsed
Once the time has elapsed, a beep will sound.
displayed in the time program function display. After pressing
the
0
symbol, the indications turn off.
Changing or cancelling the time
Press the
0
symbol, the
U
Change the time using the 1 to 9 symbols or press 0 to cancel.
indicator of the
$
lights up.
lights up
U
‹‹
‹‹
and
indicator lights up.
U
are
13
Advertisement
Table of Contents
