Car Mode; Attach The Camera To The Suction Mount - ION Adventure User Manual


Please note the user interface may vary with further firmware upgrades.


CAR MODE

CAR mode ( ) lets you capture the scenery along your drive as well as preserve a
record of any unexpected incidents. Recording operates in a loop, overwriting the
oldest files once the card is full. Files can be manually protected from delete and are
automatically protected if the G-Sensor detects a hard brake or collision.

Attach the Camera to the Suction Mount

1. Fit the screw of the CamLOCK™ to the tripod socket on the camera.
2. Tighten the CamLOCK™ screw.
3. Loosen and remove the top screw from the car mount.
4. Attach the CamLOCK™ Slot to the top of the car mount and reinstall the screw.
5. Slip the CamLOCK™ (on the camera) into the CamLOCK™ Slot.
6. Press the CamLOCK™ sides to release and slide the camera off the suction
mount for on the go use.
www.ioncamera.com EN -
15