Acura 1997 NSX Online Reference Owner's Manual page 121

Main Menu
2. Standing in front of the car, put
your fingers under the front edge
of the hood to the right of center.
Slide your hand to the left until
you feel the hood latch handle.
Push this handle to the left until it
releases the hood. Lift the hood.
Table of Contents
LATCH
HANDLE
HOOD
3. Pull the support rod out of its clip
and insert the end into the square
hole on the right side of the hood.
4. To close the hood, lift it up slightly
to remove the support rod from
the hole.
Service Station Procedures
SUPPORT ROD
CLIP
5. Snap the support rod back into its
holding clip.
CONTINUED
Before Driving