Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Fluance FiSDK500
Summary of Contents for Fluance FiSDK500
-
Page 1: Instruction Manual
HIgH PeRFORMANCe MUSIC SYSTeM FiSDK500 INSTRUCTION MANUAL iPod® not included. Thank you for your purchase of this Fluance® product. Please read this instruction manual carefully before using product to ensure proper use. Keep this manual in a safe place for future reference. www.fluance.com... -
Page 2: Need Help
HeLP? DO NOT ReTURN THIS PRODUCT TO THe STORe Please contact a FLUANCE® customer support representative first regarding any additional information on product features, specifications or assistance with setup. You may contact us via one of the methods below: Email: sales@fluance.com... -
Page 3: Table Of Contents
WHAT’S INCLUDeD ....................3 FeATUReS ........................ 3 IMPORTANT SAFeTY INSTRUCTIONS ................4 BUTTONS AND CONNeCTIONS ..................6 SeTUP ........................9 OPeRATION ......................13 SPeCIFICATIONS ....................... 15 FLUANCe WARRANTY ....................16 WHAT’S INCLUDeD • High Performance Music System for iPod/iPhone® • 4.5ft RCA Audio Composite Connection Cable • Remote Control (Battery included) • 4.5ft RCA Video Composite Connection Cable • 4 Metal Foot Spikes • 2 Year Parts and Labour Warranty... -
Page 4: Important Safety Instructions
IMPORTANT SAFeTY INSTRUCTIONS WARNINg: To reduce the risk of fire or shock hazard, do not The CAUTION marking is located on the bottom panel. expose this product to rain or moisture. CAUTION: Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type. The lightning flash with arrowhead symbol, within an equilateral triangle is intended to alert the user to the presence of uninsulated dangerous voltage within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock. - Page 5 IMPORTANT SAFeTY INSTRUCTIONS FCC statement on regulation This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference. (2) This device must accept any interference received, including interference that may cause undesired operation. Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. NOTE: T his equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and sued in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on,the user is encouraged to try to correct the interference by one or more of the following measures: · Reorient or relocate the receiving antenna.
-
Page 6: Buttons And Connections
BUTTONS AND CONNeCTIONS MUSIC SYSTeM − FRONT 1. INPUT/VOLUME INFORMATION DISPLAY 2. IR RECEIVER MUSIC SYSTeM − TOP 1. STANDBY BUTTON 3. VOLUME − DECREASE 2. INPUT SELECTION 4. VOLUME + INCREASE - 6 -... - Page 7 BUTTONS AND CONNeCTIONS MUSIC SYSTeM − BACK 1. VIDEO OUTPUT 3. POWER ON/OFF SWITCH 2. AUXILIARY AUDIO INPUT 4. AC POWER CORD ReMOTe CONTROL− BACK 1. BATTERY COMPARTMENT - 7 -...
- Page 8 BUTTONS AND CONNeCTIONS ReMOTe CONTROL− FRONT 1. STANDBY 8. TREBLE +/− 2. MENU 9. BASS +/− 3. iPod/iPhone MENU DOWN 10. RESET 4. ENTER/AUTO 11. iPod/iPhone MENU UP 5. PREVIOUS TRACK/REWIND 12. NEXT TRACK/FAST FORWARD 6. iPod/iPhone PLAY/PAUSE 13. AUXILIARY AUDIO INPUT 7. iPod/iPhone INPUT 14. MASTER VOLUME +/− - 8 -...
-
Page 9: Setup
SeTUP Setting up the Music System: Installing the Metal Foot Spikes: 1. Screw in one Metal Foot Spike into each of the four holes on the bottom of the Music System. 2. To protect hard surfaces from any scratches, it is recommeded to use the included Metal Foot Protection Coins. 3. Place a Metal Foot Protection Coin under each one of the Metal Foot Spikes as shown in the diagrams below. - 9 -... - Page 10 SeTUP Installing the Rubber Foot Pads: You may also use the Rubber Foot Pads instead of using the Metal Foot Spikes. The rubber pads have self-adhesive which holds them in place on the bottom of the Music System. 1. Remove one Rubber Foot Pad from the adhesive backing. 2. Place the pad approximately 1 inch beside the screw hole on the bottom of the Music System as shown in the diagrams below. 3. Repeat steps 1 and 2 for all of the remaining Rubber Foot Pads. DO NOT COVER HOLES WITH RUBBER FOOT PADS - 10 -...
-
Page 11: Setting Up The Remote Control
SeTUP Setting up the remote control: Battery installation: 1. Release the slide latch of the battery compartment on the back of the remote control. 2. Pull out the battery holder. 3. Install only a 3V CR2025 battery and ensure that the battery polarity "+" corresponds to the "+" sign on the battery holder. 4. Replace the battery holder. Please note: • Use only the recommended size and type of battery specified. • Please be sure to follow the correct polarity when installing the battery in the battery compartment. - Page 12 SeTUP The remote control may be less effective if: 1. A strong light is placed near the IR receiver. 2. There are obstacles between the remote control and the IR receiver. 3. Other remote controls are being used in the area at the same time. 4. The remote control has a low battery. Connecting your iPod/iPhone to your Music System: 1.
-
Page 13: Operation
OPeRATION Turning on the Music System: • Ensure that the AC power cord is plugged in and the ON/OFF switch at the back of the Music System is in the ON position. The VOL information will then be displayed in the LED window. STANDBY MODe: 1. Press this button to enter into STANDBY mode. 2. While in STANDBY mode, no information will be displayed in the LED window. 3. Press the STANDBY button again to quit the STANDBY mode. 4. The VOL information will appear in the LED window and power will be restored. INPUT MODe: 1. Press the INPUT button to choose different input signals. Pressing this button allows you to toggle between Auxiliary Audio Input and iPod/iPhone. AUX and IP will appear in the LED window to display your selection. 2. Press the AUX button on the remote control to switch the input signal to Auxiliary Audio Input, AU will appear in the LED window. - Page 14 OPeRATION TReBLe: 1. Press the TREBLE + button on the remote control to increase the treble. 2. Press the TREBLE - button on the remote control to decrease the treble. 3. The LED window will display the TREBLE level you have selected. 4. If the TREBLE levels are not adjusted within 5 seconds, the display will revert to the main level. NOTe: The TReBLe adjustment range is ± 10dB and increases/decreases in increments of 2. BASS: 1. Press the BASS+ button on the remote control to increase the bass. 2. Press the BASS - button on the remote control to decrease the bass. 3. The LED window will display the BASS level you have selected. 4. If the BASS levels are not adjusted within 5 seconds, the display will revert to the main level. NOTe: The BASS adjustment range is ± 10dB and increases/decreases in increments of 2. iPod/iPhone CONTROL: •...
-
Page 15: Specifications
SPeCIFICATIONS Tweeter 2 x 3/5” Coaxial Mounted Silk Soft Dome Ferrofluid Cooled Woofer 2 x 5” Woven Fiberglass Drivers with Butyl Rubber Surrounds Input iPod/iPhone , Auxiliary Audio Input Volume 40dB Frequency Response 40Hz-20KHz /±2dB Crossover Frequency 3500 Hz PCB Mounted Circuitry Amplifier Power (RMS) 20 Watts Continuous Average Output System Type 2 Way 4 Driver with Integrated Amplifier enclosure/Cabinet Bass Reflect Design/Precision Crafted MDF Internally Braced Dimensions 20.4 × 5.8 × 7.1 inches (51.8 × 14.7 × 18 cm) Weight 13.4 lbs (6.1 kg) Specifications are subject to change without notice. Measurements and weights may vary slightly. - 15 -... -
Page 16: Fluance Warranty
FLUANCe® WARRANTY FLUANCe® WARRANTY Thank you for choosing FLUANCE® Consumer Electronics Products! FLUANCE® GIVES THE FOLLOWING WARRANTY TO THE ORIGINAL CUSTOMER OF EACH NEW FLUANCE® PRODUCT PURCHASED FROM A DEALER AUTHORIzED BY FLUANCE®. FLUANCE® WARRANTS THAT EACH NEW PRODUCT, UNDER NORMAL USE, IS FREE FROM DEFECTS, SUBjECT TO THE TERMS AND CONDITIONS SET FORTH. IF A DEFECT SHOULD OCCUR WITHIN THE WARRANTY PERIOD, REPAIRS WILL BE MADE FREE OF CHARGE FOR PARTS AND LABOR WHEN SUCH DEFECTS ARE DETERMINED BY US TO BE ATTRIBUTABLE TO FAULTY MATERIALS OR WORKMANSHIP AT TIME OF MANUFACTURE. WARRANTY PeRIOD: THE FLUANCE® PRODUCTS LISTED BELOW ARE WARRANTED FOR PARTS AND LABOR FOR THE STATED PERIOD FROM THE DATE OF ORIGINAL PURCHASE AND ARE SUBjECT TO THE TERMS AND CONDITIONS OF THE WARRANTY. HOMe AUDIO PASSIVe SPeAKeRS: LIFeTIMe WARRANTY ACTIVe/POWeReD SPeAKeRS: 2 YeAR WARRANTY WARRANTY exCLUSIONS: PRODUCTS PURCHASED FROM A DEALER NOT AUTHORIzED BY FLUANCE®. PRODUCTS WITH THE SERIAL NUMBER DEFACED, ALTERED OR MISSING. DEFECTS RESULTING FROM DISASTER, ACCIDENT, ABUSE, MISUSE, LIGHTNING, POWER SURGES, NEGLECT, UNAUTHORIzED MODIFICATION OR WATER DAMAGE. DEFECTS OR DAMAGE AS A RESULT OF REPAIRS PERFORMED BY A PERSON OR PARTY NOT AUTHORIzED BY FLUANCE®. DEFECTS OR DAMAGE OCCURRING DURING SHIPPING (CLAIMS SHOULD BE MADE WITH THE SHIPPING COMPANY). TO OBTAIN WARRANTY SeRVICe: SHOULD YOUR FLUANCE® PRODUCT NEED WARRANTY SERVICE, PLEASE CONTACT YOUR FLUANCE®...