Alcatel-Lucent OmniTouch 4135 IP Installation Manual page 2

gettIng StaRteD
The OmniTouch 4135 IP must obtain a network address and be registered in a SIP switch (or
PBX) before it can be used. The easiest way to register an account and make the settings in the
OmniTouch 4135 IP is to use a PC connected to the same network and use the integrated web
server of the OmniTouch 4135 IP.
obtaining a network address
When the conference phone is connected to the network, it usually automatically gets a network
identity (IP address) via the network's DHCP function. If DHCP is not used in the network, please
refer to "Installation and Administration of OmniTouch 4135 IP" for instructions on setting a
static IP address.
Checking the network address
 Press Menu and select the sub menu StatuS > netWoRK.
 Read the quick reference guide if you want help navigating the menu system.
 Check the conference phone's network address under the heading IP aDDReSS.

Use this address to log into the web server in the conference phone.
Login

Log into the OmniTouch 4135 IP web server by entering the phone's network address in your
computer's web browser.
 Select admin as Profile and enter your PIN code.
 The default PIN code is 1234.
BaSIC SettIngS
These settings should be done during the installation. A full description of all the options is given
in "Installation and Administration of OmniTouch 4135 IP".
Setting time and region

Select Settings > time & Region.

Select the time zone and if you want correction for DST (Daylight saving).
 It is also possible to set the time and date manually or choose a different time server.
 Select the region where you are.
 This setting affects the tone generation.
 Save the setting.
The OmniTouch 4135 IP reboots with the new settings.
Changing the language
 Select Settings > Basic.
 Select the language you want from the list after Language and save the setting.
Changing the PIn
We recommend that you change the PIN code for Admin from the default setting to protect the
settings. Make a note of the new PIN code and keep it in a safe place. The administrator's PIN
code can only be reset with a complete reset to factory settings!
 Select Settings > Basic and click the edit button on the Admin line.
 Enter a new PIN code.
 The PIN code may consist of 8 digits.
 Click on the Set and Save buttons.