Advertisement
Quick Links
Advertisement
Summary of Contents for UBC Cool KegMaster-2
- Page 1 Beverage Keg Cooler OWNER’S MANUAL UBC Cool Made in Ukraine...
- Page 2 The keg cooler is used to prevent beer in a keg from warming up in С (50-90F) temperatures from 10 - 32 UBC Cool reserves the right to make necessary changes and modifications to the keg cooler. 2. Technical parameters С...
- Page 3 Note: A minimum clearance of 3" on each side and rear of cabinets required for optimum performance. Note: All specifications subject to change without notice.
-
Page 4: Manufacturer's Warranty
UBC Cool warrants to the original end-user of this product that should it prove defective due to improper workmanship and/of material under normal use for a period of one year from the date of installation UBC Cool will repair or replace, at its option, any defective part without charge for the part. - Page 5 5. Terms of use, transportation and disposal of the keg cooler. Description of the keg cooler and usage instructions The keg cooler needs to be equipped with the following accessories and parts for dispensing of beer: CO2 cylinder, CO2 regulators, air lines, keg coupler, beer line.
-
Page 6: Grounding Instructions
Safety instructions WARNING: Instructions pertaining to the risk of fire, electric shock, or injury to persons. GROUNDING INSTRUCTIONS For your personal safety, this appliance must be grounded. In the event of a malfunction or breakdown, grounding will reduce the risk of electric shock by providing a path of least resistance for electric current. - Page 7 10) Lock the front wheels with brakes. 11) Place the keg into the cooler. 12) Install the coupler onto the keg. 13) Power up the keg cooler by plugging it into a power outlet. If beer in the keg is already chilled, it can be served at 5C (40F) after 30 minutes. WARNING: Please keep a CO2 cylinder away from the back side of the beer cooler to prevent heating up on the cylinder.
- Page 8 • The refrigerator system of this appliance is filled with refrigerant and insulating substances which should be treated and processed separately. Call your nearest service agent or specialized servicing center. If you are unable to locate one, contact your local authorities for proper disposal instructions.
- Page 9 When beer is dispensing through the faucet, condensation may form on the outer surface of the faucet. This is a normal condition and cannot be avoided. This is caused by temperature differentials between cold beer flowing across the warmer ambient surfaces of the inner faucet. Always make sure the faucet handle is pushed fully back (closed) to prevent excess dripping.
- Page 10 The drawing shows the standard cooler contents Item Description Compressor AEA3417YXA (1/5 HP) "Tecumseh" type В-13147 AIR Condenser "KARY ER" Drip tray cod. 500.06.000.10 type 31-080х32- Р Wheels "KASTOR" type 3104- С-080- Р Wheels "KASTOR" Bracket door type S1401 "Omniatecnica" Nylon bushing type TO901 "Omniatecnica"...
- Page 11 9. Wiring diagram...
- Page 12 For additional information please call: 1-866-995-9965 (Canada) 1-888-808-9286 (USA East) 1-866-921-1030 (USA West)
Need help?
Do you have a question about the KegMaster-2 and is the answer not in the manual?
Questions and answers