Sony Bravia KDS-60R2000 Operating Instructions Manual page 7

Connecting an antenna and VCR
We recommend that you use a splitter to connect the
antenna to the TV and to the VCR etc. This should
ensure that signal loss is reduced as much as possible.
Antenna cable
(not supplied)
AC power cord
Splitter
(not supplied)
Antenna cable
*
(not supplied)
Factory-installed
antenna cable
Antenna cable
(not supplied)
A/V cable
(not supplied)
VCR
* When connecting an antenna cable, an adaptor (not
supplied) may be required.
(supplied)
S video
cable
(not
supplied)
4: Auto-tuning the TV
1
Connect the TV to your AC power outlet
(220-240 V AC, 50 Hz).
2
Press 1 on the TV (front).
When you switch on the TV for the first time, the
Time Setup menu appears on the screen.
When the TV is in standby mode (the
indicator on the TV (front) is red), press TV "/1
on the remote to switch on the TV.
2
1
2
3,4,5,8,10
3,4,5,10
7,9
1
(standby)
Continued
7
GB