Advertisement
T E C H N O L O G I E S
Hard Drive Activity
LED Jumper connections
When you boot into a system, after POST, the RAID BIOS of the controller card with the attach SATA device
information displayed on the monitor.
Hardware Installations:
1.
Power off PC and remove its cover.
2.
Select an empty PCI-E slot and insert the SATA controller.
3.
Makes sure to secure the bracket with a screw. Close the PC cover.
Technical Support
If you need any assistance to get your unit functioning properly, please have your
product information ready and contact Addonics Technical Support at:
Hours: 8:30 am - 6:00 pm PST
Phone: 408-453-6212
Email: http://www.addonics.com/support/query/
User Guide
6G 2-port SATA
PCI-Express Controller
(AD2SA6GPX1)
SATA Ports
v7.1.11
Advertisement
Table of Contents
Related Manuals for Addonics Technologies AD2SA6GPX1
Summary of Contents for Addonics Technologies AD2SA6GPX1
-
Page 1: Technical Support
User Guide 6G 2-port SATA PCI-Express Controller T E C H N O L O G I E S (AD2SA6GPX1) SATA Ports Hard Drive Activity LED Jumper connections When you boot into a system, after POST, the RAID BIOS of the controller card with the attach SATA device information displayed on the monitor. -
Page 2: Software Installation
Highlight and right click on the Standard AHCI1.0 Serial ATA Controller driver then select Update driver. Navigate to the drivers on the folder labeled AD2SA6GPX1. Installing Driver for the AD2SA6GPX1 that is Port Multiplier Compatible Right click the My Computer icon and select Manage.
Need help?
Do you have a question about the AD2SA6GPX1 and is the answer not in the manual?
Questions and answers