Shooting With Continuous Shutter; Using The Self Timer; Applying A Grid Overlay - Lytro Illum User Manual

Shooting with continuous shutter

When continuous shutter is active, the camera will trigger the shutter as rapidly as possible for as long as the shutter button is
held down — or until the shot buffer is full. To activate continuous shutter mode, tap the Continuous Shutter icon in the Menu
bar and the icon will illuminate. To return to single shutter mode, tap the icon again.

Using the self timer

To activate the self-timer and set the countdown duration, tap and briefly hold the Self-Timer icon. The icon will illuminate and a
submenu will open to the left, with options for 2 and 10 seconds. Tap on the desired selection, the submenu will close, and the
new selection will now be displayed as the Self-Timer icon. The self-timer indicator will also replace the shutter mode indicator in
the Information Bar. If no selection is made after a few seconds, the submenu will close.
To turn off the self-timer, tap the icon again. The camera will remember the selected countdown the next time the self-timer is
activated.

Applying a grid overlay

To select a grid overlay and apply it to the live view, tap and briefly hold the Grid Overlay icon. A submenu will open to the left,
displaying available options. Swipe up on the submenu view additional options. Tap any option to select an overlay style. The
submenu will close, and the new selection will now be displayed as the Grid Overlay icon. If no selection is made, after a few
seconds the submenu will close. To turn off the grid overlay, tap the icon again. The camera will remember your selected settings
the next time the overlay is activated.
48