Summary of Contents for STRIKER PLUS Pro
-
Page 1: User Manual
Striker Service Reminder System Striker Service Reminder System User Manual Version 3.5 Updated: 02/2015 Striker III Striker Pro Copyright © 2015 Cobra Systems, Inc. All rights reserved... -
Page 2: Table Of Contents
TABLE OF CONTENTS Introduction Striker System Specifications Warranty Support Out of the Box Accessories Striker Quick Start Loading Ink Rolls Loading Stickers Connecting Striker Keypad Powering Up the Striker System Striker Label Formats Striker Keypad Menu Setting System Preferences Questions & Remedies Striker Calibration Copyright ©... -
Page 3: Introduction
Introduction Thank you for purchasing the Striker Service Reminder System. With Striker, you will market your services and help retain your customers simply by printing a professional service reminder sticker. Utilize all the templates to help maximize your profits by informing your customers of the next service due, the next oil change and much more! Remember, every customer shouldn’t leave your shop without a service reminder sticker, whether the next service is a tire rotation, transmission flush, tune up, 30K-90K service or even a battery... -
Page 4: Striker Quick Start
Striker Quick Start 1. Load Striker Reminder Stickers 2. Load Striker Ink Rolls 3. Clamp down ink carriage as shown 4. Close the Striker cover 5. Connect the Striker Keypad to the printer 6. Connect power then turn on and print and make sure to use a surge protector NOTE: Always have the Striker System cover closed when powering it on. -
Page 5: Loading Ink Rolls
Loading Striker Ink Rolls TURN OFF Release the Striker ink carriage system and lever by open the gently printer cover pressing up on the lever Load rear ink Load the spindle with take up the unused ink core portion of spindle and the ink roll make sure... -
Page 6: Loading Stickers
Loading Striker Labels TURN OFF Release the Striker ink carriage system and lever by open the gently printer cover pressing up on the lever Load the Place the Striker label spindle Reminder with Striker Stickers as Stickers shown left, inside the make sure label spindle the guides... -
Page 7: Connecting Striker Keypad
Behind the Striker Printer Power On/Off DC Input Keypad Connection Connecting Striker Keypad Connect the Striker Keypad cord to the back of the Striker Printer. The keypad cord is a male RS232 and will connect to the keypad connection as noted above and the right. Powering On/Off Connect the power DC cord to the back of the Striker Printer. -
Page 8: Striker Label Formats
Striker Service Label Formats 1) Standard Label Market Your Shop 1234 Smart Street - Automatically adds the Standard Millage and Month Your City, CA 12345 return interval for return service, includes optional (800) 262-7298 customer message, “Have a Nice Day!”. Return Mileage: 100000 Return Date:... -
Page 9: Striker Keypad Menu
Enter Zip Code: WITH DISCOUNT CUSTOM INTERVAL Enter Phone Number: WITH DISCOUNT Enter QR Code: SERVICE TEMPLATE (QR works with Striker Pro only) SERVICE TEMPLATE DATE/TIME SETUP WITH DISCOUNT PRESS ENTER Enter Month (1-12): EXIT PRINT A LABEL? Enter Day (1-31):... -
Page 10: Setting System Preferences
Setting System Preferences Your Striker System allows you to set your own custom intervals for each type of Reminder Striker as well as customize the information printed on the sticker. Use the Set Preferences fields to customize the Striker System to your preferences. SET PREFERENCES PRESS ENTER Enter the grade of oil that is most commonly used at your station. -
Page 11: Questions & Remedies
Questions & Remedies Q: The Ink Roll is sticking to the reminder A: The Striker Printer did not recognize that the stickers and coming out the printer. ink roll was loaded. Turn the unit off, re-attached the ink roll to the take up core, close your Striker Printer before turning it back on. - Page 12 Copyright © 2015 Cobra Systems, Inc. All rights reserved...
Need help?
Do you have a question about the Pro and is the answer not in the manual?
Questions and answers