Page 2
DECLARATION OF CONFORMITY We, EADS Secure Networks, declare under our sole responsibility that the product EADS THR880i is in conformity with the provisions of the following Council Directives:1999/5/EC (R&TTE) & 2002/95/EC (ROHS). Copies of the Declaration of Conformity can be found at http://www.eads.com/thr880i.
Page 3
The availability of particular products may vary by region. Please check with the EADS Secure Networks dealer nearest to you. El uso y el funcionamiento de este dispositivo requieren licencia. Si desea obtener información detallada, póngase en contacto con las autoridades competentes en materia de frecuencia de su país.
Q u i c k g u i d e Quick guide This quick guide gives you tips for using your EADS THR880i radio. For more detailed information, read through the user guide. Before using your radio 1. Install and charge the battery.
Page 5
Q u i c k g u i d e numbers. Scroll to Private, Abbr. number, Phone, or Office ext., and press . See also Make a phone call on page 53. Answer a phone call Press when a ringing tone is •...
Page 6
Q u i c k g u i d e Use left and right keys as shortcuts Your organisation may • — have predefined certain functions for the left and right keys, such as activating GPS receiver or opening received status messages.
Contents Quick guide......3. Using your radio ....33 Access a menu function ....33 Contents........Menu list ........34 Fast menu ........36 FOR YOUR SAFETY ....10 Voice feedback......37 For all other radios except for RC-3......13 4.
Page 8
9. Write text....... 71 Call an abbreviated TETRA number......51 Predictive text input ....... 71 Speed dialling ......51 Traditional text input...... 72 Receive an express call....51 Tips ..........72 Respond to an express call ..52 10. Contacts ......74 Reject an express call....
Page 9
Delete messages ......90 Other options available Message settings......90 for an application ......106 Log (Menu 3) ......... 91 Other options available Recent calls lists ......91 for a folder ........107 Counters and timers ....92 Downloading an application ..108 Contacts (Menu 4) ......
F O R Y O U R S A F E T Y FOR YOUR SAFETY Read these simple guidelines. Not following them may be dangerous or illegal. Read the complete user guide for further information. SWITCH ON SAFELY Do not switch the radio on when wireless phone use is prohibited or when it may cause interference or danger.
F O R Y O U R S A F E T Y ENHANCEMENTS AND BATTERIES Use only approved enhancements and batteries. Do not connect incompatible products. BACK-UP COPIES Remember to make back-up copies or keep a written record of all important information.
F O R Y O U R S A F E T Y Network Services. For instance, some networks may not support all language-dependent characters and services. Your service provider may have requested that certain features be disabled or not activated in your radio. Contact your service provider for more information.
F O R Y O U R S A F E T Y Interference filters For all other radios except for RC-3 To check the type number of your radio, remove the battery. The type number (RC-2, RC-3, RC-4, RC-6, RC-10, RC-11, RC-12 or RC-13) is printed on the white label inside your radio.
General information Active holder The wearable active holder CRR-1 offers multiple carrying possibilities, and makes the EADS THR880i radio an integral part of the work outfit. Access codes The factory setting for the four-digit phone code is 1234. When the phone code request is enabled, the code is requested each time the radio is switched on.
G e n e r a l i n f o r m a t i o n Transmission barring When transmission barring is active, the radio does not send any signals to the network, and only limited network services are available.
G e n e r a l i n f o r m a t i o n To activate or deactivate transmission barring, select Menu→ Settings→Phone settings→Transmission barring→On or Off. Transmission barring should be active before you enter the area where you want transmission to be barred.
Page 17
G e n e r a l i n f o r m a t i o n Note: Make sure the interior of your radio and the back cover seals are dry, clean, and free of any foreign objects. Foreign objects may damage the seals against water.
G e t t i n g s t a r t e d 1. Getting started Install the battery 1. To open the battery cover, press the release button upwards, away from the bottom connectors. Pressing the release button down makes the opening harder. 2.
G e t t i n g s t a r t e d Install the electromagnetic interference filters For all other radios except for RC-3 To check the type number of your radio, remove the battery. The type number (RC-2, RC-3, RC-4, RC-6, RC-10, RC-11, RC-12 or RC-13) is printed on the white label inside your radio.
G e t t i n g s t a r t e d Charge the battery 1. Connect the lead from the charger to the bottom of your radio. 2. Connect the charger to an AC wall outlet. The battery indicator bar starts to scroll.
G e t t i n g s t a r t e d Note: As with any other radio transmitting device, do not touch the antenna unnecessarily when the radio is switched on. Contact with the antenna affects call quality and may cause the radio to operate at a higher power level than otherwise needed.
Y o u r r a d i o 2. Your radio The power key switches the power • on and off. The function of the selection keys • and middle selection depends on the guiding text shown on the display above the keys. The scroll keys , and •...
Y o u r r a d i o Idle mode When the radio is switched on and ready for use and no characters have been entered by the user, the radio is in the idle mode. The following indicators appear: xxxxxx In the network mode, if group calls are switched off, indicates in which network the radio is currently used.
Y o u r r a d i o Scroll key shortcuts In the network mode, press to access the list of talk groups in • the selected folder. In the direct mode, press to access the list of direct mode channels. In the network mode, press to access the list of talk group •...
Y o u r r a d i o Red key calls and status sending In the network mode, the red key call is a network service. Before you can take advantage of this network service, you must subscribe to it through your service provider, and obtain instructions for its use from your service provider.
Y o u r r a d i o Group selector and back key In the network mode, turning the group selector is used for selecting groups. The names of the current folder and group are shown on the display. It may also be possible to browse the groups of the selected folder in a continuous loop.
Y o u r r a d i o To speak during a one-way call, press and hold the PTT key. You can start speaking after a short tone is played and (transmitting) appears on the display. Release the PTT key to let the other party speak.
Y o u r r a d i o When you use the earpiece, hold the radio as you would any other telephone, with the antenna pointed up and over your shoulder. When you use the loudspeaker, hold the radio approximately 10 cm (4 inches) away from your mouth, with the antenna pointed up and away from your face and eyes.
Page 29
Y o u r r a d i o The top microphone is selected in the audio settings of the profile. See Profiles on page 92. An external speaker and top microphone are selected in the audio settings of the profile. See Profiles on page 92. The speakers and tones are muted.
Page 30
Y o u r r a d i o The GPS receiver is on; note that using the GPS receiver may drain the battery faster. When the indicator blinks, the GPS receiver is calculating its location. See GPS receiver on page 63 and Positioning application on page 64.
Y o u r r a d i o Displayed during a call made to a scanned group when nobody is transmitting. Displayed during normal direct mode calls when no direct mode device is available. See Direct mode on page 56. Displayed during direct mode calls when a compatible direct mode gateway is available.
Page 32
Y o u r r a d i o Imminent call disconnection Network is going to end the • — ongoing call. Restricted group coverage Group call setup is restricted if all • — required network resources are not obtained. Not granted, broadcast call You cannot answer a broadcast call.
U s i n g y o u r r a d i o 3. Using your radio Access a menu function Tip: You can select whether the menu is shown as a list or as a grid, like in the picture. See Display settings on page 98.
U s i n g y o u r r a d i o Menu list 1. Status msgs. 4. Delete 5. Add number 1. Send status 6. Settings 2. Received 7. Speed dials 3. Sent 8. Caller groups 4. Outbox 9.
Page 35
U s i n g y o u r r a d i o 6. Transmission barring 11. Time and date settings 1. Clock 4. Direct mode settings 2. Date 1. Direct mode scanning 3. Auto-update of date & 2. View active direct mode time device 12.
U s i n g y o u r r a d i o Fast menu The fast menu contains frequently-used menu functions. To access the fast menu, press Your organisation can define which of the following items are shown in the fast menu: Network mode Direct...
U s i n g y o u r r a d i o If voice feedback is activated, the radio plays the names of the items when you scroll with 2. To activate the highlighted item, press and hold , or press Select.
G r o u p c a l l s 4. Group calls Basics Group calls (network service) are immediate one-way calls within a talk group. They are connected without the recipients answering. You can select one talk group you primarily want to communicate with, and other talk groups whose calls you want to scan.
G r o u p c a l l s Folders The talk groups in your radio are arranged in folders. One folder can have up to 200 predefined talk groups and up to 200 dynamic (over- the-air) talk groups. Only one folder can be selected at a time, and you can only scan or call those talk groups that are in the selected folder, with the exception of the home group.
G r o u p c a l l s Select Menu→Talk groups→Group settings. To change the priority of the home group, select Home group priority; if you do not want to scan the home group, select Off. To view the folder and group name of the home group, select Home group.
G r o u p c a l l s Switch group calls on and off 1. Select Menu→Talk groups→Group settings→Group calls. 2. To switch group calls on, scroll to On, and press OK. To switch group calls off, scroll to Off, and press OK. You can call or receive calls from a talk group if it is a selected or a scanned group and if it is available.
G r o u p c a l l s When you turn the group selector, the group name appears on the display, and if voice feedback is activated, the radio plays the index number of the current group. To switch between the last two selected groups (excluding the home group), press the back key.
G r o u p c a l l s PTT key settings You may set the PTT key to function in either of the following ways: Pressing and holding the PTT key always makes a call to the • selected group, even if the radio has just received a call from a scanned group and the name of the scanned group is still on the display.
G r o u p c a l l s When you receive a group call, the folder and group names, the caller’s name or number, and (receiving) are displayed in the idle mode. Also a group call starting tone can be played, if your organisation has defined it.
G r o u p c a l l s To request for voice override, press Overrid., and press and hold the PTT key. You can start speaking after a short tone is played and appears on the display. Exit a menu When the radio is receiving a group call and you are using another menu function, for example writing a text message, you can exit the menu by briefly pressing...
G r o u p c a l l s If you have set the PTT key to always make a call to the selected group, you cannot call a scanned group in this way; see PTT key settings on page 43. To call the scanned group, first set it as the selected group;...
Page 47
G r o u p c a l l s Select Menu→Talk groups. Below the submenu Edit group folders, you can see how many groups in the selected folder have the scanning state Included. Select Edit group folders, and select the desired folder.
G r o u p c a l l s To rename the predefined user’s talk group folders, in the Talk groups folder, scroll to the folder you want to rename, and select Options→Rename folder. You need access rights to rename a folder.
G r o u p c a l l s the original values. Groups copied by the user to the user’s My folders are deleted. The original home group is set as the selected group, and the folder of the home group is set as the selected folder.
E x p r e s s c a l l s 5. Express calls Express calls (network service) are immediate one-way calls between two people. They are connected without the recipient answering. You can make express calls to TETRA network and public telephone network numbers.
E x p r e s s c a l l s Call type changed appears, the call has changed into a one-way phone call. You must wait until the other party answers it before you can start speaking. To end the call, press You can also search for the phone number in Contacts;...
E x p r e s s c a l l s Respond to an express call Press and hold the PTT key, and start speaking after a short tone is played and appears on the display. Reject an express call To reject an express call, press If the loudspeaker is not in use and the radio alerts for an express call, rejecting the call sends the line busy tone to the caller.
P h o n e c a l l s 6. Phone calls Phone calls (network service) are like conventional telephone calls. They can be made to TETRA network and public telephone network numbers. Phone calls are normally two-way calls, but your radio is also capable of making and receiving one-way phone calls in case the other party’s terminal cannot make or receive two-way calls.
P h o n e c a l l s 4. To call the number, press 5. To end the call, press You can also search for the phone number in Contacts; see Search for names on page 75. is displayed, the loudspeaker is in use. To activate or deactivate the loudspeaker, press .
P h o n e c a l l s Call transfer When you make a phone call that needs to go via the dispatcher (for example when the call must first be authorized by the dispatcher), Transferring call is displayed after you enter the phone number and press before the dispatcher transfers the call to the desired number.
D i r e c t m o d e 7. Direct mode Basics In the direct mode, the radio operates without the network, so that the radios communicate directly with each other. The direct mode enables one-way calls both in the network coverage area and outside the network coverage area.
D i r e c t m o d e Start direct mode communication Activate direct mode To activate direct mode, select Menu→Settings→Phone settings→ Active mode→Direct. To return to the network mode, select Network. When you activate the direct mode, the selected channel and group are those that were last selected in the direct mode.
D i r e c t m o d e When you select a channel, the first group (A) is automatically selected. To switch between the second and the third group (B and C) on the same channel, press the back key. To select the first group (A) on the channel, press and hold the back key.
D i r e c t m o d e If the connection to the transmitting radio is lost, Connection lost displayed. Respond to a direct mode call Press and hold the PTT key while the channel and group names are displayed.
D i r e c t m o d e 2. Press and hold the PTT key, and start speaking after a short tone is played and appears on the display. Pressing and holding in the idle mode makes a call to the first group on the selected channel.
D i r e c t m o d e When the radio is on a direct mode channel where a compatible direct mode repeater device is available, Repeater is displayed in the idle mode, and during direct mode calls, is displayed.
D i r e c t m o d e Press and hold the red function key, and the radio attempts to make a red key call. Press the red function key and then the back key, and the radio attempts to make a silent red key call. However, if the silent call is made to the predefined direct mode group, it changes into an ordinary red key call to the group.
Your radio is equipped with an internal GPS receiver. A GPS terminal, such as the GPS receiver in the EADS THR880i, receives low-power radio signals from the satellites, and measures the travel time of the signals. From the travel time, the GPS receiver can calculate its location to the accuracy of metres.
P o s i t i o n i n g Note: The Global Positioning System The Global Positioning System (GPS) is operated by the United States government, which is solely responsible for accuracy and maintenance of the system. The accuracy of location data can be affected by adjustments to GPS satellites made by the United States government and is subject to change with the United States Department of Defense civil GPS policy and the Federal Radionavigation Plan.
P o s i t i o n i n g The second display contains the approximate altitude from the mean sea level. If the device is moving, the approximate speed and the approximate direction of the movement in degrees from true north are also shown.
Page 66
P o s i t i o n i n g Send as message to send the waypoint name, the coordinates, • — and the comment as a text message. Edit name to edit the name of the waypoint. • —...
Page 67
P o s i t i o n i n g The waypoint guidance application is designed to show the straightest route and shortest distance to the target. Any obstacles on the route, such as buildings and natural obstacles, are ignored. The waypoint guidance is active only when you move.
P o s i t i o n i n g To remove waypoint information from the idle mode display, deactivate waypoint information from idle mode. Press Go to select Waypoint idle off. Position settings To change settings related to positioning, select Menu→ Positioning→Position settings.
Page 69
P o s i t i o n i n g The radio does not send position information even if position • — requests are received. Priority calls only The radio attempts to send position • — information only when position requests from authorised numbers are received during a call to an emergency number programmed into your radio, or during a red key call or a silent red key call to a network mode destination.
Page 70
P o s i t i o n i n g Set units of measurement To select which units are used to display position information, select Set units of measurement. You can select the unit separately for Accuracy, Speed, and Altitude. Display position info in idle mode To select whether position information is displayed in idle mode, select...
W r i t e t e x t 9. Write text You can enter text, for example, when writing messages, in two different ways. You can use traditional text input or predictive text input. Note that your radio may not support predictive input. For more information, contact your organisation.
W r i t e t e x t 2. When you have finished writing the word and it is correct, confirm it by pressing or adding a space with If the word is not correct, press repeatedly until the word you want appears, and confirm it.
Page 73
W r i t e t e x t To insert a word when using predictive text input, select • Options→Insert word. Write the word using traditional text input, and press Save. The word is also added to the dictionary.
C o n t a c t s 10. Contacts You can save multiple phone numbers and text, such as an e-mail address, a street address, or a note under a name in the contacts directory. To quickly access the list of names in the contacts directory, press Names in the idle mode.
C o n t a c t s The first number saved under a name is automatically set as the default number. When you select a name from Contacts, for example, to make a call, the default number is used unless you select another number.
C o n t a c t s Tip: To search for a name during a call, select Options→ Contacts→Search. Send and receive contacts Send contacts You can send a contact entry to an individual recipient or to a group. 1.
C o n t a c t s When you receive a new number to an already existing contact entry from a sender who does not belong to the list of allowed numbers, Contact name received. Add to phonebook? is displayed. If you press Yes, Add to already existing name? is displayed.
C o n t a c t s To delete all names and numbers from the contacts directory, select Menu→Contacts→Delete→Delete all. When Are you sure? displayed, press OK, and confirm with the security code. Settings for Contacts Select Menu→Contacts→Settings, and select one of the following: Contacts view You can select how your radio shows the stored •...
C o n t a c t s You can use the Alert for setting in profiles to set the radio to ring only when receiving phone calls from names and numbers that belong to a specific caller group. See Profiles on page 92. Terminal info You may see details about your subscriber identity and a short text written by your organisation, if so defined, by selecting Menu→...
M e n u f u n c t i o n s 11. Menu functions Status msgs. (Menu 1) Select Menu→Status msgs.. You can read and send status messages (network service), and save them for later use. There are three types of status messages: Status messages are predefined messages with varying •...
M e n u f u n c t i o n s Unit alert messages The unit alert network service is a type of status message. It is used to alert people to the following radio traffic. If you receive a unit alert message, pay special attention to the following calls and messages.
M e n u f u n c t i o n s Search for an individual recipient from Contacts. Select • Search→Contacts, and select the desired name and number. To send the message, press when the number is displayed. Search for a talk group in the selected folder.
M e n u f u n c t i o n s Status message with a time stamp The radio can be configured to include a time stamp in a sent status message. By default this feature is set to OFF. The time stamp shows the time when the message was sent.
M e n u f u n c t i o n s for unread and for read status messages • for unread and for read situation indicators • for unread and for read callback requests • 3. Scroll to the desired message, and press Read. When you are reading a message, you can delete the message by pressing Delete.
M e n u f u n c t i o n s Delete status messages 1. Select Menu→Status msgs.→Delete messages. 2. Scroll to the folder whose contents you want to delete, and press OK. Or, scroll to to delete the contents of all the status message folders, and press OK.
M e n u f u n c t i o n s Important: Some networks may not support the text message character counts indicated in this user guide. In such a network, text messages that are over the allowed number of characters cannot be delivered, but they may be deleted as a whole.
M e n u f u n c t i o n s Search for an individual recipient from Contacts. Select • Search→Contacts, and select the desired name and number. To send the message, press when the number is displayed. Search for a talk group in the selected folder.
M e n u f u n c t i o n s The blinking indicator indicates that the message memory is full. Before you can receive new messages, delete some of your old messages. 1. Press Show to read the message, or press Exit to read it later.
M e n u f u n c t i o n s When you send a message, it is saved in the Sent items folder by default. It is also possible to configure the radio so that outgoing messages are not saved in the Sent items folder.
M e n u f u n c t i o n s Delete messages Select Menu→Messaging→Delete messages. To delete all read messages in a certain folder, select the folder, and press when Delete all read messages from folder? is displayed. To delete all read messages from all folders, select read, and press when...
M e n u f u n c t i o n s Log (Menu 3) You can view the phone numbers of missed, received, and dialled calls, and view the approximate length of your two-way phone calls (network service). You can also check the amount of sent and received data and the duration of a packet data connection.
M e n u f u n c t i o n s Counters and timers Note: The actual invoice for calls and services from your service provider may vary, depending on network features, rounding off for billing, taxes and so forth. Select Menu→Log, and select one of the following: Call duration to view the approximate duration of your incoming...
M e n u f u n c t i o n s To activate a profile, press quickly in the idle mode, and select the desired profile. Customise profiles 1. Select Menu→Settings→Profiles. 2. Scroll to the desired profile, and select Options→Personalise. 3.
M e n u f u n c t i o n s Push-to-talk setting You can set how you want the PTT key to function when making group calls in the network mode. Select Menu→Settings→Call settings→Push-to-talk setting, and select one of the following: Default to set the radio to make a call to the talk group whose •...
M e n u f u n c t i o n s Welcome note To save a note that is briefly displayed when the radio is switched on, select Menu→Settings→Phone settings→Welcome note. Write the note, and press Save. Network selection You can select the network in which the radio operates (network service).
M e n u f u n c t i o n s Direct mode settings Select Menu→Settings→Direct mode settings, and select one of the following: Direct mode scanning to activate or deactivate direct mode • — scanning. Direct mode scanning allows you to receive calls made to the other groups on the same channel.
M e n u f u n c t i o n s Enhancement settings 1. Select Menu→Settings→Enhancement settings. 2. Select Active holder, Headset, Monophone, or Handsfree, and select one of the following: Default profile Select the profile you want to have activated •...
M e n u f u n c t i o n s select Alias for access point. To change the Access Point Name (APN), select Access point. Contact your network operator or service provider for the APN. Security settings Select Menu→Settings→Security settings, and select one of the...
M e n u f u n c t i o n s radio supports JPEG, GIF, WBMP, BMP, OTA-BMP, and PNG formats, but not necessarily all variations of these file formats. To select a wallpaper from Gallery, select Select wallpaper.
M e n u f u n c t i o n s synchronization manually. If you don't want the clock to be synchronized at all, select Off. If the battery is removed from the radio for a long time or if the battery is completely empty, you may need to set the time and date again.
M e n u f u n c t i o n s Restore factory settings To reset some of the menu settings to their original values, select Menu→Settings→Restore factory settings. You must enter the security code to use this function. Gallery (Menu 7) Copyright protections may prevent some images and other content from being copied, modified, transferred or...
M e n u f u n c t i o n s If the alarm time is reached while the radio is switched off, the radio switches itself on and starts sounding the alarm tone. If you press Stop, the radio asks whether you want to activate the radio for calls.
M e n u f u n c t i o n s the calendar note. For entering letters and numbers, see Write text on page 71. When the alarm time is reached, the radio plays a tone and displays the note.
M e n u f u n c t i o n s Calculator Note: This calculator has limited accuracy and is designed for simple calculations. 1. Select Menu→Organiser→Calculator. 2. When "0" is displayed, enter the first number in the calculation. Press for a decimal point.
M e n u f u n c t i o n s If the alarm time is reached when the radio is in the idle mode, the radio plays a tone, and flashes Countdown time up or the note you set on the display.
M e n u f u n c t i o n s Note that if Java applications use the packet data connection, the connection is established using the same connection settings that are used with the radio’s Web browser. See Connect to a browser service on page 111.
M e n u f u n c t i o n s Communication to restrict network access, messaging or • — connectivity. Data access to restrict access to user data. • — Positioning to restrict access to positioning data. •...
M e n u f u n c t i o n s Details to provide information about the name, date of creation, • — and size of a folder. Type of view to set the way the radio displays the applications: •...
M e n u f u n c t i o n s Positioning (Menu 10) See Positioning on page 63. Web (Menu 11) You can access various services with the browser. The services may include services provided by your organisation, weather reports, news or flight times, and financial information.
M e n u f u n c t i o n s 3. Start browsing the pages of the service. See page 112. 4. When you have finished browsing, disconnect from the service. See page 112. Service settings The service settings may be predefined in your radio, or you may receive the service settings as an over-the-air message from the network operator or service provider that offers the service that you want to use.
M e n u f u n c t i o n s connection→Yes. To set the radio to alert when a secure page contains an unsecure item, select Alert for unsecure items→Yes. Note that these alerts do not guarantee a secure connection.
M e n u f u n c t i o n s Enter the address of the service. Select Menu→Web→Go to • address, enter the address (press for special characters), and press OK. Browse the pages of a service After a connection to the service has been established, you can start browsing its pages.
M e n u f u n c t i o n s Bookmarks Your radio may have some bookmarks loaded for sites not affiliated with EADS. EADS does not warrant or endorse these sites. If you choose to access them, you should take the same precautions, for security or content, as you would with any Internet site.
M e n u f u n c t i o n s The cache memory A cache is a memory location that is used to store data temporarily. If you have tried to access or have accessed confidential information requiring passwords, empty the cache after each use.
Page 115
M e n u f u n c t i o n s Important: Note that even if the use of certificates makes the risks involved in remote connections and software installation considerably smaller, they must be used correctly in order to benefit from increased security.
D a t a c o m m u n i c a t i o n 12. Data communication You can use your radio as a modem and transfer data to other compatible devices when the radio is connected to a compatible PC with a data cable (network service).
D a t a c o m m u n i c a t i o n 3. Activate an access point, and change its settings in Modem settings. See Modem settings on page 97. Connect your radio to a PC You can connect your radio to a compatible PC using a data cable.
B a t t e r y i n f o r m a t i o n 13. Battery information Charging and discharging Your radio is powered by a rechargeable battery. The full performance of a new battery is achieved only after two or three complete charge and discharge cycles.
Page 119
B a t t e r y i n f o r m a t i o n Do not dispose of batteries in a fire as they may explode. Dispose of batteries according to local regulations. Please recycle when possible. Do not dispose as household waste.
C A R E A N D M A I N T E N A N C E CARE AND MAINTENANCE Your radio is a product of superior design and craftsmanship and should be treated with care. The suggestions below will help you protect your warranty coverage.
I M P O R T A N T S A F E T Y I N F O R M A T I O N IMPORTANT SAFETY INFORMATION Operating environment Remember to follow any special regulations in force in any area and always switch off your radio when its use is prohibited or when it may cause interference or danger.
Page 122
I M P O R T A N T S A F E T Y I N F O R M A T I O N always keep the radio more than 6 in. (15.3 cm) from their pacemaker • when the radio is switched on;...
I M P O R T A N T S A F E T Y I N F O R M A T I O N Potentially explosive environments Switch off your radio when in any area with a potentially explosive atmosphere and obey all signs and instructions.
Page 124
I M P O R T A N T S A F E T Y I N F O R M A T I O N When making an emergency call, give all the necessary information as accurately as possible. Your radio may be the only means of communication at the scene of an accident.
Page 125
I M P O R T A N T S A F E T Y I N F O R M A T I O N standard operating positions with the handset transmitting at its highest certified power level in all tested frequency bands. The highest SAR value for this model handset when tested for use at the ear is 0.42 W/kg for radio type RC-2 and RC-12, 0.74 W/kg for radio type RC-3, 0.47 W/kg for radio type RC-4 and RC-13, 0.5 W/kg for radio type RC-6,...