1. Manuals
  2. Brands
  3. Waldorf Manuals
  4. Toaster
  5. GT8600G
  6. Installation and operation manual

Waldorf GT8600G Installation And Operation Manual

Waldorf gt8600g gas griddle toaster
Hide thumbs Also See for GT8600G:
Table of Contents

Advertisement

Quick Links

Download this manual
I n s t a l l a t i o n a n d O p e r a t i o n M a n u a l
Gas Griddle Toaster
G T8600G
Date Purchased
Serial Number
Dealer
Service Provider
For use in GB & IE
228002-15

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the GT8600G and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Waldorf GT8600G

Summary of Contents for Waldorf GT8600G

  • Page 1 I n s t a l l a t i o n a n d O p e r a t i o n M a n u a l Gas Griddle Toaster G T8600G Date Purchased Serial Number Dealer Service Provider For use in GB &...
  • Page 2 MANUFACTURED BY Moffat Limited Christchurch New Zealand INTERNATIONAL CONTACTS AUSTRALIA Moffat Pty Limited Web: www.moffat.com.au E.Mail: vsales@moffat.com.au Main Office: (tel) +61 (03) 9518 3888 (fax) +61 (03) 9518 3833 Service: (tel): 1800 622 216 Spares: (tel): 1800 337 963 Customer Service: (tel): 1800 335 315 (fax): 1800 350 281...

  • Page 3: Table Of Contents

    Contents Waldorf Gas Griddle Toaster GT8600G Introduction ....................2 Specifications ....................3 Model Numbers Covered in this Specification General Optional Accessories Gas Supply Requirements Gas Connection Dimensions ....................5 Weight (Nett) Installation ....................6 Installation Requirements Unpacking Location Clearances Assembly...

  • Page 4: Introduction

    Introduction We are confident that you will be delighted with your WALDORF GAS GRIDDLE TOASTER, and it will become a most valued appliance in your commercial kitchen. To ensure you receive the utmost benefit from your new appliance, there are two important things you can Firstly Please read the instruction book carefully and follow directions given.

  • Page 5: Specifications

    Specifications Model Numbers covered in this Specification GT8600G Gas Griddle Toaster General A commercial heavy-duty gas fired griddle toaster, having two tubular burners heating a griddle plate from underneath and providing toasting heat for the toasting rack below. Burners are operated by individual control valves and are provided with a piezo ignition and a permanent pilot incorporating a thermocouple flame failure control.
  • Page 6 Specifications - All Other Markets: Natural Gas Town Gas (**) Input Rating (N.H.G.C.) 42MJ/hr 42MJ/hr Supply Pressure 1.13 - 3.40kPa 0.75 - 1.50kPa Burner Operating Pressure (*) 1.0kPa (*) 0.63kPa (*) Gas Connection ” BSP Male LP Gas (Propane) Butane Input Rating (N.H.G.C.) 42MJ/hr 42MJ/hr...

  • Page 7: Dimensions

    Dimensions GT8600G Gas Connection Point. Weight (Nett) GT8600G 120kg...

  • Page 8: Installation

    Waldorf Griddle Toasters are designed to provide years of satisfactory service and correct installation is essential to achieve the best performance, efficiency and trouble-free operation. This appliance must be installed in accordance with National installation codes and in addition, in accordance with relevant National / Local codes covering gas and fire safety.

  • Page 9: Clearances

    50mm Rear 50mm Appliance Assembly Base GT8600G model only This model is delivered completely assembled. No further assembly is required. NOTE: This appliance is fitted with adjustable feet to enable it to be positioned securely and level on uneven floors. This should be carried out on completion of gas connection.

  • Page 10: Gas Connection

    Gas Connection NOTE: ALL GAS FITTING MUST BE CARRIED OUT BY A QUALIFIED SERVICE PERSON. Waldorf Gas Griddle Toasters do not require an electrical connection, as they function totally on gas supply only. It is essential that gas supply is correct for appliance being installed and that adequate supply pressure and volume are available.

  • Page 11: Commissioning

    Installation NOTE: Measure burner operating pressure at manifold test point with both burners operating at ‘Full’ setting. Verify operating pressure remains correct. Low Fire Adjustment Commissioning Pressure Test Point Fig 3 Before leaving the new installation; a. Check the following functions in accordance with operating instructions specified in ‘Operation’ section of this manual.

  • Page 12: Operation

    / operator. Waldorf Gas Griddle Toasters have been designed to provide simplicity of operation and 100% safety protection. Improper operation is almost impossible, however, bad operation practices can reduce the life of the appliance and produce a poor quality product.

  • Page 13: Lighting Pilot Burners

    Operation Lighting Pilot Burners Depress gas control knob and rotate anti-clockwise to ‘PILOT’ position. With control knob depressed, press piezo ignition button until pilot burner ignites. Pilot ignition can be viewed through openings in control panel. Hold in gas control knob for approximately 10 seconds, then release. Pilot burner should remain alight.

  • Page 14: Cleaning And Maintenance

    Cleaning and Maintenance General Caution Always turn ‘Off’ gas supply before cleaning. This appliance is not water proof. Do not use water jet spray to clean interior or exterior of this appliance. Clean the griddle toaster regularly. A clean appliance looks better, will last longer and will perform better.

  • Page 15: Daily Cleaning

    Cleaning and Maintenance Daily Cleaning Crumb tray / grease drawer should be checked and emptied frequently to prevent overflow and spillage. Remove grease drawer while still warm so that grease is in a liquid state. Empty any grease from drawer and wash thoroughly in same manner as any cooking utensil. Remove crumb tray and empty out contents.

  • Page 16: Periodic Maintenance

    Cleaning and Maintenance Stainless Steel Surfaces a. Clean exterior surfaces of griddle toaster with hot water, a mild detergent solution and a soft scrubbing brush. Note that gas control knobs are a push fit onto gas control valve spindles and can be removed to clean front of control panel. b.

  • Page 17: Fault Finding

    Fault Finding This section provides an easy reference guide to the more common problems that may occur during operation of your equipment. The fault finding guide in this section is intended to help you correct, or at least accurately diagnose problems with your equipment. Although this section covers the most common problems reported, you may encounter a problem not covered in this section.

  • Page 18: Gas Conversion And Specifications

    Gas Conversion and Specifications Conversion Procedure Caution Ensure Appliance is isolated from gas supply before commencing servicing. NOTE: These conversions should only be carried out by qualified persons. All connections must be checked for leaks before re-commissioning the appliance. Adjustment of components that have adjustments / settings sealed (e.g. paint sealed) can only be adjusted in accordance with the following instructions and shall be re-sealed before re-commissioning this appliance.
  • Page 19 Gas Conversion and Specifications Gas Regulator NAT Gas / LPG / Butane Only. NOTE, Pin rotated for Natural Gas NOTE, Pin rotated for LPG NOTE: The gas regulator supplied is convertible between Natural Gas and LP Gas, but it’s outlet pressure is fixed ex-factory and is NOT to be adjusted.

  • Page 20: Gas Specifications

    Gas Conversion and Specifications Gas Specifications - Australia: Natural Gas LP GAS (Propane) Main Burner Injector 2.10mm 1.30mm Pilot Burner Injector 0.35mm 0.23mm Low Fire Adjustment 1 turn out (c.c.w.) ½ turn out (c.c.w.) Operating Pressure 1.0 kPa (*) 2.5 kPa (*) Supply Pressure 1.13 - 3.40 kPa 2.75 - 4.50 kPa...
  • Page 21 Gas Conversion and Specifications - All Other Markets: Natural Gas Town Gas Main Burner Injectors Ø 2.10mm Ø 3.80mm Pilot Burner Injectors 0.35 0.60 Low Fire Adjustment 1 turn out (ccw) 2 turns out (ccw) Burner Operating Pressure (*) 1.0kPa (*) 0.63kPa (*) Main Burner Aeration Shutter Fully Open...

  • Page 22: Replacement Parts List

    Replacement Parts List Replacement Part List When ordering replacement parts, please quote the part number and the description as listed below. If the part required is not listed below, request the part by description and quote the model and serial number which is on the rating plate.
  • Page 23 Accessories 228795 Plinth Kit - 600mm. 228566 Griddle Scraper Tool. 228567 Smooth Plate Scraper Blades (Pack of 5 blades). Gas Conversion Kits Gas Type to Convert to Model Nat. Gas LPG (Propane) Butane Town Gas GT8600G 231980 231979 231981 232013...

Table of Contents