Page 3
Built from the ground up with the fundamental elements that makes a product Do not install near any heat sources such as radiators, heat registers, distinctly Earthquake - Power, Performance and Quality. It is our sincere stoves, or other apparatuses that produce heat.
Pin 2 ↔ Tip = Positive/Red/Hot Simply adjust accordingly to your listening preference. Pin 3 ↔ Ring = Negative/Black/Cold CONNECT ONLY ONE INPUT SOURCE AT A TIME. Earthquake Europe | support@earthquakesound.dk | www.earthquakesound.eu Specifications are subject to change without notice...
Page 5
90°- 110° 90°- 110° ≥ 3 feet Avoid placing any large objects near the monitors and listening position. Earthquake Europe | support@earthquakesound.dk | www.earthquakesound.eu Specifications are subject to change without notice...
(the monitor, the ➞Note that the Studioquake’s XLR and TRS connectors are completely cable or elsewhere). If the problem still persists at this point, please contact Earthquake Sound balanced. If you are connecting an unbalanced signal to the monitor, for service.
324 x 228 x 292mm 284 x 265 x 335mm ø5x20mm 2A/250V ø5x20mm 3.15A/250V Fuse Rating UL/VDE slow blow tube UL/VDE slow blow tube Specifications are subject to change without notice. Earthquake Europe | support@earthquakesound.dk | www.earthquakesound.eu Specifications are subject to change without notice...