Connections - Panasonic KX-TG3651BX Operating Instructions Manual

TG3651BX(e).book Page 10 Monday, May 31, 2010 8:51 AM
Preparation

Connections

Connect the AC adaptor cord (A) by pressing the
plug firmly (B). Connect the handset cord to the
corded handset and the base unit (C). Connect
the telephone line cord until it clicks into the base
unit and telephone line jack (D).
Base unit
L Use only the supplied Panasonic AC adaptor
PQLV219BX.
Press plug firmly.
B
Click
D
A
(100-240 V AC,
50/60 Hz)
To single-line telephone
jack
Base
unit
Charger
L Use only the supplied Panasonic AC adaptor
PQLV219BX.
Press plug firmly.
A
(100-240 V AC,
50/60 Hz)
10
Note:
L The AC adaptor must remain connected at all
L The AC adaptor should be connected to a
During a power failure
The base unit will work as a standard telephone
using power from the telephone line and you can
make or answer outside calls with the corded
handset. You cannot use the base unit
speakerphone and the handset.
Note:
Hook
L The base unit rings in "Tone 1" during a power
Click
L The handset of the extension number 1 will
C
C
Click
L The handset will continue to search for the base
If you subscribe to a DSL/ADSL service
Please attach a DSL/ADSL filter (contact your
DSL/ADSL provider) to the telephone line between
the base unit and the telephone line jack in the
Base event of the following:
unit
– noise is heard during conversations.
– Caller ID features do not function properly.
B
Hooks
times. (It is normal for the adaptor to feel warm
during use.)
vertically oriented or floor-mounted AC outlet.
Do not connect the AC adaptor to a ceiling-
mounted AC outlet, as the weight of the adaptor
may cause it to become disconnected.
failure, when a call is receiving.
maintain the date and time until the batteries
discharged. After the power is restored, the
base unit will receive the date and time
information from the handset.
unit and the battery power will be consumed
faster than usual.
DSL/ADSL filter
(Not supplied)
To single-line
telephone jack