Table of Contents
Advertisement
Basic Setup Wizard
Basic Setup Wizard
The Basic Setup Wizard helps you start up your device and guides you step by step
through the configuration process with the most important settings.
The Basic Setup Wizard comprises the following steps:
u
Entering the access data for the WiMAX network
u
Configuring the Internet access
u
Selecting the antenna
u
Positioning the device
u
Scanning the frequencies to establish a radio connection with a WiMAX network
u
Exact alignment of the antenna to optimise the quality of the connection
You can check all the configuration settings that you make with the Basic
i
Setup Wizard later via the Advanced Settings menus and, if necessary,
change them, see "Advanced Settings" on page 31.
Starting the Basic Setup Wizard
ì
To start the Basic Setup Wizard, click the Basic Setup Wizard tab.
ì
Click Next.
Entering access data for the WiMAX network
On this page you enter the data for authentication of your device on the WiMAX base
station. You will need the access data supplied by your WiMAX operator for this.
ì
Enter the access data and click Next.
Setting up Internet access
To allow users in your local network access to the Internet, set up the Internet connec-
tion of your device using the information supplied by your Internet provider.
ì
Enter the access data and click Next.
i
Your Gigaset SE681 WiMAX can be used as an Internet router or bridge.
For more on this see "Setting the operating mode" on page 32.
26
Advertisement
Table of Contents
