Related Manuals for Smart Robby TC-158N
Summary of Contents for Smart Robby TC-158N
-
Page 1: User Manual
USER MANUAL Please read this manual carefully before use Please keep this manual for future reference ROHS... -
Page 2: Table Of Contents
CONTENTS 1. INTRODUCTION AND SAFETY 2. PRESENTATION 3. INSTALLATION 4. CONTROL PANEL AND REMOTE CONTROL 5. USE 6. MAINTENANCE AND STORAGE 7.TROUBLE SHOOTING 8. EXPLODED VIEW... -
Page 3: Introduction And Safety
Carry the mower by the handle at the rear under instructions in this manual. the mower. Carry the mower with the blade device Model: TC-158N away from the body. CE, RoHs approved. Product, product specifications and this document are WARNING subject to change without notice. - Page 4 1. INTRODUCTION AND SAFETY 5. Warning symbol. - Always turn off the power before lifting the mower or attempting any adjustment. DANGER DANGER! Sharp rotating blade. Keep hands and feet - Do not operate the mower on slopes greater than 30 away.
-
Page 5: Presentation
2. PRESENTATION 2. PRESENTATION This chapter contains information you should be aware of before placing the installation. 2.1 What’s in box Bumper: Consumable parts: Charging terminal To change a new direction when it 1. Blade Virtual wire terminal bumps obstacles. 2. - Page 6 2. PRESENTATION 2.2 Function of S510 - Two cutting modes There are two cutting modes of the mower, go straight - Lift sensor and go circle (high efficiency). There are lift sensors located on the front wheels. If the In Auto, mower selects cutting mode intelligently. mower is lifted from ground, it will stops working within It goes straight if the grass is sparse or it has be cut off, 1 second.
- Page 7 2. PRESENTATION 2.3 Technical date Model No. TC-158N Battery Type of battery Mower technical date Lithium/Lead-acid Battery capacity Gross weight 18/21KGS 6.6Ah/7.2Ah ≤3hours Net weight 15/18KGS Charging time Mower size Average working time 2-3hours 56*51*25cm(LWH) Functions: Rated power ≤65db Noise...
-
Page 8: Installation
3. INSTALLATION 3. INSTALLATION Cutting height explanation: take 3cm level for example. This chapter describes how you to install this mower. Cutting height: 3cm Before starting the installation, read the previous chapter 2. Presentation. Grass Read the whole of this chapter before starting the Height installation. - Page 9 3. INSTALLATION - Bury virtual wire below grass and fasten it on 3.4 Virtual wire installation the ground with pegs, so that the mower should The virtual wire can be installed in one of the following not cut the wire. ways: Add pegs in order to pull the - Securing the wire to the ground with pegs.
- Page 10 3. INSTALLATION - Use the virtual wire to isolate areas inside the working - Care must be taken not to create a corner sharper area by creating islands around obstacles that can shorter than 90 degrees when setting up virtual wire. not withstand a collision, for example, flower beds and A corner sharper less than 90...
- Page 11 3. INSTALLATION 3.5 Virtual wire and charging station connecting. WARNING 1. Cut the two ends of virtual wire to a length of 1cm that’s The charger is not water-proof, it must be convenient for reaching located on a place which is dry and ventilated. the virtual wire terminal on charging station.
-
Page 12: Control Panel And Remote Control
4. CONTROL PANEL AND REMOTE CONTROL 4.2 Remote control 4. CONTROL PANEL AND REMOTE CONTROL 4.1 Control Panel view Indicator light. ON/OFF button: To stop the mower. Press it, mower enters standby mode. Speed up. Turn right. Speed down. Enter MANUAL pattern Turn on or turn off the cutting blade. -
Page 13: Use
5. USE 5. USE 5.2 Starting the mower IMPORTANT INFORMATION There are two locations of start the mower. - Do not leave the mower to operate unattended if you 1.Put the mower clockwise onto virtual wire, make sure know that there are pets, children or people in the that the mower is not connected with two charging vicinity... - Page 14 5. USE Year Week Month / Date SYSTEM TIME Hour / Minute SAVE / EXIT TIME MON,TUE,WED,THU,FRI,SAT,SUN, EXIT SCHEDULE TIME START TIME AREA 1 AREA 2 AREA 3 SAVE / DEL / EXIT 00:00 000 MIN 000 MIN 000 MIN EXIT Robot mower...
- Page 15 5. USE 5.5 System time setting 7. Press key or key to scroll to SAVE and save the . settings by pressing key 1. Select TIME and enter it by pressing key 8. Select DEL to delete the settings. 2. Select SYSTEM TIME and enter it by pressing key IMPORTANT INFORMATION By using SCHEDULE function, the LINE must be turn on or the robot must be put onto virtual wire.
- Page 16 5. USE 5.10 Language selection - It’s best to set the Memory point in the middle of two corners. 1. Select SET and enter it by pressing key - A better position of Memory point is a length of 3m’s 2.
-
Page 17: Maintenance And Storage
6. MAINTENANCE AND STORAGE 15. Servicing of the mower should be according 6. MAINTENANCE AND STORAGE manufacturers instructions. This product - During maintenance operations, use the individual (include battery pack) must be disposed of at a protections indicated by the Manufacturer , especially designated collection pint for electrical when intervening on the blade. -
Page 18: Trouble Shooting
7.TROUBLE SHOOTING 7. TROUBLE SHOOTING Display Possible reasons Solutions Problem 1.Check the virtual wire After enter the correct 1.The virtual wire fails to send signals. light on charging station. password and select Be sure the virtual wire is AUTO mode, but the connected to the charging 2.The virtual wire was mower still can not start. - Page 19 7.TROUBLE SHOOTING Display Possible reasons Solutions Problem 1. The battery is low. 1. Change new batteries. Remote control does 2. Remote control is not 2. Match the frequency not work. match with robot. with mower. 1.Send the mower to service Power nearing natural The batteries can not station and replace the...
-
Page 20: Exploded View
8. EXPLODED VIEW Robot Exploded View - 18 -... - Page 21 8. EXPLODED VIEW Charging Station Exploded View 1.Top cover 2.PCB 3.Power terminal 4.Virtual wire terminal 5.Underpan 6.Copper sheet 7.Copper sheet permanent seat - 19 -...
- Page 22 Robot lawn mower USER MANUAL...
Need help?
Do you have a question about the TC-158N and is the answer not in the manual?
Questions and answers