Advertisement
Quick Links
Advertisement
Summary of Contents for Eagle 1000
- Page 1 –1200W Spot SF-SH04 〔220V 50/60H 〕 (18CH) Moving Head Light USER MANUAL...
-
Page 2: Product Instruction
○ Product instruction Thank you for choosing our professional 1200W moving head ★ This user guide includes very important information to guarantee the safe and proper use of the light, please read carefully and operate according to the instruction. ★ This moving head light applied advanced design and processing technique, adopted new type high intensity high temperature resistant engineering injected plastics. -
Page 3: Safety Instruction
○ Safety instruction ！ Please consult eligible persons before maintenance ！ Please make sure the power supply has been cut off during installation, maintenance, and transportation. ！Please do not use power supply and lamps of different specifications. ！ During operation, the high temperature the light creates might lead to danger, therefore please don’t put any inflammable and explosive things around the light, and please don’t touch the light body during operation. -
Page 4: Control Channel
The original address code set-up before the products leave the factory: ● patterns and colors streamline, X,Y axis is the positive direction Use the XLR-XLR cable from the signal output port of the consol to connect the signal input port of ●... - Page 5 0 – 255 Gobo 4 gobo + white 0 – 255 Gobo Rotation 4 gobo double directions rotation and gobo rotation 0 – 255 …… Static Gobo 0 – 255 Focus Zoom Electric linear focus 11-24 degree 0 – 255 Prism Prism on 0 –...
- Page 6 "001--512"; Press “ENTER” to confirm exit, press “ESC” to abandon exit. 3. To accept the mainframe synchronous (from the models), you have to set the address value as "001". 4. In the address value situations, if you install DMX controller without connecting, the display will twinkle;...
- Page 7 you don’t need to reverse, please select “ OFF”, press “ENTER” to save and exit, press “ESC” to exit directly. 六、r.tilt. [tilt reverse in vertical] This function allows you to reverse in vertical. Press “ ENTER” to enter, use “UP” or “DOWN”, if you need to reverse, please select “ON”; if you don’t need to reverse, please select “...