EMIX EMWS-661W Owner's Manual

Wall Mount Speaker System EMWS-661W
OWNER'S MANUAL
Thank you for purchasing PA speaker system of EMIX series. All of EMIX series
products have been tested strictly before shipping. EMIX series PA speaker system is widely
used in hotel, trade building, supermarket, school, entertainment, etc. It's the most ideal
choice of you! In order to facilitate installing, modulating and running please read this
manual carefully before setup.

FEATURES:

The wall mount speaker is suitable for different public address wires.
It can be switched between the ohms terminal and the voltage
terminal.
Rated power 10W .Max. Sound Pressure Level 100
Freq. Range 100Hz-20kHz;
Weight 2.8kg, equipped with hanging holes for mounting ;
It is made of high quality engineering plastic, long-term durability,
never out of shape and fade;
Provided with high sensitivity 90
sonorousness.
Public Address System
± ± ± ±
2 dB, Effective
± ± ± ±
2 dB, long life, sounds clear and
FREQ. RESPONSE
(dB SPL 、 1 W 、 1 m)

INSTALLATION DIAGRAM

This knob is used to
select the different
input voltage.
Connect public address
wire to these two terminals.
Warning: DO NOT switch the knob to the low impedance
terminal (8 Ω Ω Ω Ω ) when the speaker is connected with amplifier's
high impedance output terminal (100V), otherwise the speaker
will be damaged!
DISTORTION
(THD< 1.5% 1W 、 1 m 、 2 00Hz-12kHz)
10m m
4. 5m m
Hang the speaker
with the nail on wall.
4m m - 6m m
www.emix.com.my