Advertisement
Quick Links
ZT-600-710-SP16 (Self-Propelled with 41cm seat width)
ZT-600-710-SP18 (Self-Propelled with 46cm seat width)
Transit
•
1. Maximum weight capacity 120KG
•
2. Seat width 41cm and 46cm
•
3. Frame colour silver
•
4. Upholstery colour black
•
5. Seat cushion attached to seat with Velcro strips
•
6. Both heel strap and calf strap on footrests
•
7. 41cm solid rear wheels
•
8. Storage pocket in back upholstery
•
9. Seat Belt
10. Half folding backrest
•
Please ensure that this manual is read and understood
Unit 1B Albion Works, Moor Street, Brierley Hill, West Midlands DY5 3SZ
M o b i l i t y F o r L i f e
DELUXE FOLDING
ALUMINIUM
ZT-600-710
WHEELCHAIR
USER MANUAL
Available Models:
ZT-600-710-TR16 (Transit with 41cm seat width)
ZT-600-710-TR18 (Transit with 46cm seat width)
before using the wheelchair
Z-Tec Mobility
•
1. Maximum weight capacity 120KG
•
2. Seat width 41cm and 46cm
•
3. Frame colour silver
•
4. Upholstery colour black
•
5. Seat cushion attached to seat with Velcro strips
•
6. Both heel strap and calf strap on footrests
•
7. Quick Release 56cm solid rear wheels
•
8. Storage pocket in back upholstery
•
9. Seat belt
10. Half folding backrest
•
Self-propelled
Advertisement
Related Manuals for Z-Tec ZT-600-710-SP16
Summary of Contents for Z-Tec ZT-600-710-SP16
-
Page 1: User Manual
M o b i l i t y F o r L i f e DELUXE FOLDING ALUMINIUM ZT-600-710 WHEELCHAIR USER MANUAL Available Models: ZT-600-710-SP16 (Self-Propelled with 41cm seat width) ZT-600-710-SP18 (Self-Propelled with 46cm seat width) ZT-600-710-TR16 (Transit with 41cm seat width) ZT-600-710-TR18 (Transit with 46cm seat width) Self-propelled Transit •... -
Page 2: Safety Tips
Introduction These wheelchairs have been designed for persons with limited or no personal mobility for transport only. This user’s manual is compiled from the latest specifications and product infor- mation available at the time of publication. We reserve the right to make changes as they become necessary. -
Page 3: Parts Description
SAFETY TIPS Regular checks before use Please check the following before each use: Quick release axles on the rear wheels • Tyres and brakes. Brakes will not function properly if the tyres are worn • or damaged, or if the gap between the tyre and brake is too big. The maximum user weight is 120kg. - Page 4 Handling Opening and Folding Opening Rest both hands on each of the seat upholstery support rails and press down until the seat and back upholsteries become tight. (see photo 1) Make sure that the seat support rails are safely located in the sup- port cups.
- Page 5 Assembly Leg rest Assembly To Assemble • To fit the footrests place the top pin into the wheel- chair frame. Turn the footrest assembly towards the centre of the chair and push down to secure. Leg rest 1 To Remove •...
- Page 6 Brakes Parking Brake The brakes are preset and adjustment should only be necessary if the brakes be- come loose or no longer function correctly. To apply the parking brake push the brake lever towards the front of the wheelchair. Push the lever back to release the brakes. See photos below. These levers are to be used by hand only.
- Page 7 Warranty Z-Tec wheelchairs are guaranteed for 12 months from the date of purchase, this warranty is not transferable. Should any part of the wheelchair require repair or full replacement as a result of a manufacturing or material defect within the warranty period, parts will be sup- plied free of charge.