METASONIX D-2000 Owner's Manual

Metasonix d-2000 drum machine

Hide thumbs

Table Of Contents

Table of Contents

Quick Links

Download this manual

D-2000 drum machine

owner's manual ver. 1.0

WARNING:

this is an extremely abnormal product .

If you purchased it expecting to get

"TR606-like" or "vintage-like" drum

sounds, you will be sorely

disappointed.

CAUTION: to reduce the risk of electrical shock, do not disassemble.

DANGER! DANGER! HIGH VOLTAGE INSIDE. No user serviceable parts

inside. Refer servicing to qualified service personnel.

DETAILED SAFETY INSTRUCTIONS:

All the safety and operation instructions must be read before the D-2000 is operated. If you don't read and HEED

them, you are a MORON and you deserve to be fed to carnivorous hamsters.

RETAIN INSTRUCTIONS: The safety and operating instructions should be retained for future reference.

HEED WARNINGS: All warnings on the D-2000 and in the operating instructions should be adhered to.

FOLLOW INSTRUCTIONS: All operating instructions should be followed.

WATER AND MOISTURE: The D-2000 should not be used near water (e.g. near a bathtub, washbowl, kitchen sink,

Table of Contents

Need help?

Do you have a question about the D-2000 and is the answer not in the manual?

Questions and answers

Summary of Contents for METASONIX D-2000

Page 1 Refer servicing to qualified service personnel. DETAILED SAFETY INSTRUCTIONS: All the safety and operation instructions must be read before the D-2000 is operated. If you don't read and HEED them, you are a MORON and you deserve to be fed to carnivorous hamsters.
Page 2 The D-2000 MUST NOT be used on a bed, sofa rug or similar surface which may prevent proper cooling. It is NOT a toy, AND IT IS NOT A DILDO. If the D-2000 is mounted in a rack or other built-in installation, space must be left around it to allow convection from the case.
Page 3 METASONIX shall not be held liable for any incidental, consequential, or direct damages or expenses associated with the use or misuse of the D-2000. The audio output of the D-2000 is capable of damaging some types of solid-state audio equipment; such use is entirely at the risk of the user.
Page 4 Drum” voices, such as the Tiptop Trigger Riot or the Doepfer A-157, should also work with the D-2000, although they will have to be mounted in an external Euro cabinet with its own power supply. Clock generators or dividers will work with the “Gated Noise”...
Page 5 HOW TO SET UP AND USE The D-2000 needs 12 volts DC power at 2 amps minimum. DO NOT attempt to power it with AC, you will DAMAGE IT AND THE POWER SUPPLY. DO NOT experiment with random AC-DC adapters. The power connector is a 2.1mm coaxial type, and can usually also accept 2.5mm connectors.
Page 6 PLEASE” pins on the module's power connector. Ðo not screw this up, or you might damage the sequencer! The trigger outputs connect to the “trig in” jacks on the D-2000 voices. You will need either four or five 3.5mm mono patch cords, depending on use of the LINK switch. Any of the outputs on the sequencer can be connected to any of the “trig in”...
Page 7 Then you are welcome to return to your first love: eating your mother's pussy. (text is copyright 2010 Metasonix. All rights reserved. It is a violation of federal law to reproduce, reuse or duplicate this publication without the express written permission of Metasonix or its assigned representative.) (Oh, you want to FIX it? You say you want a SCHEMATIC?? Oh, that's PRICELESS.