Troubleshooting - Dynamic CCTV DTV-IRB-SDI User Manual

■

Troubleshooting

PROBLEM
Nothing appears on the screen.
The image on the screen is dim.
The image on the screen is dark.
The camera is not working
properly, and the surface of the
camera is hot.
The SENS-UP function does
not work.
The Motion Detection function
does not work.
Color is not correct.
The screen flickers continually.
22
●
Check that the power cord and line connection
between the camera and monitor are fixed properly.
●
When the camera's HD-SDI BNC output is directly
connected to the monitor's BNC terminal.
Make sure the monitor supports HD-SDI signal input.
●
When the camera's HD-SDI BNC output is directly
connected to the DVR. Make sure the DVR supports
HD-SDI signal input.
●
HD-SDI output is converted into format such as DVI
and VGA by using video converter.
connected to the DVR. Make sure the DVR supports
HD-SDI signal input. Make sure the converter's HD-
SDI input format supports the product's output video
format.
●
Is lens stained with dirt? Clean your lens with soft,
clean cloth.
●
Set the monitor to proper condition.
●
If the camera is exposed to very strong light, change
the camera position.
●
Check the mode "Indoor or Outdoor"
●
Adjust the contrast feature of the monitor.
●
Check that you have properly connected the camera
to an appropriate power source.
●
Check that AGC of EXPOSURE SETUP menu is
'OFF'.
●
Check that MOTION DET of SPECIAL SETUP menu
is 'OFF'.
●
Check the setting of WHITE BAL SETUP menu.
●
Ensure the camera is not poilning toward the sun.
●
Is the camera traming the sun or other bright light
source?
●
HD-SDI video may not appear to be normal if distance
exceeds the maximum transferrable distance.
●
When a BNC cable adaptor is used to combine two or
more BNC cables for distributed HD-SDI video
transfer, make sure the impedance of the adaptor is
750. Otherwise., if may cause shorter transfer distance
or broken video transfer.
FULL HD-SDI IR CAMERA
SOLUTION