Opel 2011 Insignia Owner's Manual page 172

172 Vehicle care
Tyre pressure monitoring
system
The tyre pressure monitoring system
checks the pressure of all four wheels
once a minute when vehicle speed
exceeds a certain limit.
All wheels must be equipped with
pressure sensors and the tyres must
have the prescribed pressure.
The current tyre pressures can be
shown in the Vehicle Information
Menu in the Driver Information Center
with Uplevel-Display.
The menu can be selected by the
buttons on the turn signal lever.
Press the MENU button to select the
Vehicle Information Menu.
Turn the adjuster wheel to select the
tyre pressure monitoring system.
System status and small pressure
differences are displayed by
a warning message with the
corresponding tyre flashing or by
a warning code in the Driver
Information Center.
Furthermore considerable pressure
differences between the tyres on one
axle or a considerably increased tyre
pressure are displayed by a warning
message or by a warning code in the
Driver Information Center.
Major pressure differences are
indicated additionally by the control
indicator w.
Control indicator w 3 85.
Vehicle messages 3 90.
If the tyre pressure shall be reduced
or increased, switch off ignition.
If a complete set of wheels without
sensors is mounted (e.g. four winter
tyres), a message or a code is
displayed in the Driver Information
Center. The tyre pressure monitoring
system is not operational. Retrofitting
of sensors is possible.
A spare wheel or temporary spare
wheel is not equipped with pressure
sensors. The tyre pressure
monitoring system is not operational
for these wheels. Control indicator w
illuminates. For the further three
wheels the system remains
operational.
Back to overview