LG PH300 Owner's Manual page 10

10
SAFETY PRECAUTIONS
• Only a qualified technician
can disassemble or modify
the projector. For diagnosis,
adjustment, or repair, contact
your seller or our service center.
- This may result in fire or
electric shock.
• Do not stare directly into lens
when in operation, eye damage
can occur.
• No user serviceable parts
inside unit. High voltage parts
can cause shock and even
electrocution.
• Proper ventilation required, do
not block airflow around unit.
Doing so can cause injury and
internal overheating.
• To prevent damage to lamp,
unit must remain plugged in for
approximately 3 minutes after
power down to allow for proper
cool down (not applicable on
LED models).
• Do not touch the lens; doing so
can result in burns or damage
to lens. Lens and unit may be
HOT during and immediately
after use. Use caution when
handling unit, allowing for proper
cool down.
• Only use a grounded electrical
outlet.
• Do not insert anything into or
cover up the exhaust vents.
- This may result in fire or
electric shock.
• Follow all maintenance
guidelines for optimal use;
service only at an authorized
service center.
• Lamp contains mercury and
as such must be disposed of
according to local, state and
federal laws (not applicable on
LED models).
• Keep it out of reach of children.
- Failure to do so may result in
personal injury and damage
to the product.
CAUTION
• Do not use or store the projector
outdoors for long periods of time.
• Be sure to unplug if the projector
is not to be used for a long
period.
- Accumulated dust may result
in fire or electric shock due to
overheating, ignition, or poor
insulation.
•
Only use the specified type of
battery.
- Burst or leaking batteries
may result in damage or
injury.