Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for DAS WR-6415
Summary of Contents for DAS WR-6415
- Page 1 User´s Manual WR series Antes de utilizar el equipo, lea la sección “Precauciones de seguridad” de este manual. Conserve este manual para futuras consultas. Before operating the device, please read the “Safety precautions” section of this manual. Retain this manual for future reference.
-
Page 2: Table Of Contents
8 x WR-8826 (1150W @ 4 Ohms) 16 x WR-8826 (2100W @ 2 Ohms) 4 x WR-6412 or WR-6415 (1150W @ 4 Ohms) 8 x WR-6412 or WR-6415 (2100W @ 2 Ohms) 16 x WR-6412 or WR-6415 (3700W @ 2 Ohms) -
Page 3: Safety Precautions
WR series Precauciones de Seguridad Safety Precautions Cajas acústicas pasivas / Passive loudspeaker enclosures Conserve y lea todas estas instrucciones. Keep these instructions. Siga todas las advertencias. Heed all warnings. Follow all instructions. El signo de exclamación dentro de un triángulo indica la The exclamation point inside an equilateral triangle indicates the existencia de componentes internos cuyo reemplazo puede existence of internal components whose substitution may affect... -
Page 4: Warranty
GARANTÍA Todos nuestros productos están garantizados por un periodo de 24 meses desde la fecha de compra. Las garantías sólo serán válidas si son por un defecto de fabricación y en ningún caso por un uso incorrecto del producto. reparaciones garantía pueden realizadas,... -
Page 5: Declaration Of Conformity
DECLARACIÓN DE CONFORMIDAD DECLARATION OF CONFORMITY D.A.S. Audio, S.A. C/ Islas Baleares, 24 - 46988 - Pol. Fuente del Jarro - Valencia. España (Spain). Declara que la serie WR: Declares that WR series: Cumple con los objetivos esenciales de las Directivas: Abide by essential objectives relating Directives: Low Voltage Directive 2006/95/EC Regulation (EU) No 305/2011 - Constrution Products... -
Page 6: System Description
The WR-8826 models are equipped with the M-1 driver employing a 1” annular diaphragm and an 80º x 80º horn geometry. The WR-6412 and WR-6415 models use D.A.S. loudspeakers equipped with robust 4” voice coils and the M-75 compression driver with 1.5”... -
Page 7: Line Drawings
.- Blue --> + .- Brown --> - To obtain a better performance and achieve the best optimization of the system parameters, DAS AUDIO recommends using the WR cabinets with amplifier models D-20 or D-100 and the D S P2040 processor shown configurations in this manual. - Page 8 The system includes 5m of connection wire ready to use in the application. If more than 5m of connection wire is required, a longer cable can be used. If so proceed as follows: 1.- Prepare the rear part of the enclosure for cable connection, removing the existing cable. INPUT INPUT INPUT...
-
Page 9: Specifications
TECHNICAL SPECIFICATIONS Technical Specifications WR-6412 WR-6415 WR-8826 200 W 400 W 400 W RMS (Average) Power Handling : 400 W 800 W Program Power Handling : 800 W 800 W 1600 W Peak Power Handling : 1600 W 70 Hz - 22 kHz... -
Page 10: Configurations
CONFIGURATIONS 4 x WR-8826 625W @ 8 Ohms DSP-2040 D-20 Two WR-8826 (16ohms each) in parallel mode per channel. Refer to the user manual of the D-20 amplifier for SPEAKON connection. 8 x WR-8826 1150W @ 4 Ohms DSP-2040 D-20 Four WR-8826 (16ohms each) in parallel mode per channel. -
Page 11: 16 X Wr-8826 2100W @ 2 Ohms
16 x WR-8826 2100W @ 2 Ohms DSP-2040 D-20 Eight WR-8826 (16ohms each) in parallel per channel. Refer to the user manual of the D-20 amplifier for SPEAKON connection. 4 x WR-6412 (or WR-6415) 1150W @ 4 Ohms WR-6412 WR-6412 DSP-2040 D-20 Two WR-6412 (8 ohms each) in parallel per channel. -
Page 12: Wr-6412 Or Wr-6415 (2100W @ 2 Ohms)
2100W @ 2 Ohms WR- 6415 DSP-2040 D-20 WR- 6415 Four WR-6415 (8 ohms each) in parallel per channel. Refer to the user manual of the D-20 amplifier for SPEAKON connection. 16 x WR-6412 (or WR-6415) 3700W @ 2 Ohms WR-6412... -
Page 13: Installation Instructions
INSTALLATION INSTRUCTIONS Warnings Absolutely no risks should be taken with This manual contains needed information for regards to public safety. When flying enclosures flying D.A.S. Audio systems, description of the from ceiling support structures, extreme care elements and safety precautions. To perform any should be taken to assure the load bearing operations related to flying the system, read the capabilities of the structures so that the installation... - Page 14 Flying with eyebolts The WR series models feature internal steel In the case of the ANL-2 eyebolt, this means flying points with mounting threads. These eyebolt that the 200 kg working load becomes 60 kg at 45 flying points are factory sealed with M10 screws, degrees.
- Page 15 /AXU- WR6415 are not included with the WR-8826 / 4.- Attach the unit to the support using the WR-6412 and WR-6415 respectively in the screws (step 1) but do not tighten. packaging. 5.- Aim the unit to the desired angle and tighten screws.
- Page 16 Description of the AXU-WR8826 / AXU-WR6412 / AXU-WR6415 Refer to the user’s manual of accessories, on our website, for more information. AXC-AT for use in combination with two AXC-AT free use AXC-ZT free use for mounting on wall or ceiling 0º...
-
Page 17: Troubleshooting
TROUBLESHOOTING PROBLEM CAUSE SOLUTION 1 - No sound from any units. 1.1 – No signal present in the 1.1.1 – Check that the amplifier is amplifier 1.1.2 – Check that the gain is set above its minimum setting. 1.1.3 – Check that there is a signal to your amplifier from your mixer. - Page 18 www.dasaudio.com D.A.S. AUDIO, S.A. D.A.S. AUDIO OF AMERICA, INC. D.A.S. AUDIO ASIA PTE. LTD. C/. Islas Baleares, 24 Sunset Palmetto Park 25 Kaki Bukit Crescent #01-00/02-00 46988 Fuente del Jarro 6816 NW 77th Court. Kaki Bukit Techpark 1 Valencia, SPAIN Miami, FL.