3.3. General Operations
3.3.1. Specifying Operational Mode
On this page, you can specify the operational mode for the DRBAP. There are 3 modes:
Bridge Repeater. In this mode, both WLAN interfaces are configured as LAN-to-LAN bridge
interfaces. A bridge repeater forwards packets between two wireless LAN-to-LAN bridges. It's
possible to use multiple bridge repeaters between two LAN-to-LAN bridges if the distance is
very long.
LAN
Segment
1
Wireless
Bridge
AP Repeater. In this mode, one WLAN interface is configured as an AP interface, and the other
is configured as a LAN-to-LAN bridge interface. The AP repeater is suitable for situations in
which Ethernet wiring between the AP and the network backbone is impossible or costs highly.
Fig. 25. Operational modes.
WDS Link
Bridge Repeater
Fig. 26. Bridge Repeater mode.
20
LAN
Segment
2
Wireless
Bridge