Gear Assembly P2; Gear Assembly P3; Base Assembly P2; Base Assembly P3 - LG TL-AT130M Service Manual

DECK MECHANISM DISASSEMBLY
Gear Assembly P2 Hole
Gear Assembly P3 Hole
Lever Spring Boss
29. Gear Assembly P2 (Fig. A-8-1)/
Gear Assembly P3 (Fig. A-8-2)
1) Just lift the Gear Assembly P2 up.
2) Just lift the Gear Assembly P3 up.
NOTE
When reassembling, align the two holes of the Gear
Assembly P2 and P3 in a straight line after confirmation
whether the Gear Sector Hole(A) and the Plate Slider
Hole(B) are aligned or not as Fig.
Gear Sector Hole(A)
Plate Slider Hole(B)
(B)
Chassis

Base Assembly P3

(Fig. A-8-4)

Base Assembly P2

(Fig. A-8-3)
Fig. A-8
30. Base Assembly P2 (Fig. A-8-3)/
Base Assembly P3 (Fig. A-8-4)
1) Move the Base Assembly P2 in direction of arrow(A)
along the guide hole of the Chassis and disassemble it
on bottom side.
2) Move the Base Assembly P3 in direction of arrow(B)
along the guide hole of the Chassis and disassemble it
on bottom side.
4-10

Gear Assembly P3

(Fig. A-8-2)

Gear Assembly P2

(Fig. A-8-1)
(A)