50Hz mains power, which is the standard in Australian households. Your Avancer Kettle must be earthed and should be disconnected from mains power when not in use. Do not allow your Kettle to be exposed to rain or moisture outside normal use...
Page 4
Application Filling your Kettle 1. Ensure that the Kettle is lifted off the base before filling. 2. To fill the kettle, open the cover by lifting the lid. 3. Fill to the desired level (Min 0.8 L~Max.1.8L) 4. Close the lid by pressing it down until it clicks into place. Switching On/Off 1.
Page 5
If the Kettle is shown to have had an inherent defect present at the time of sale, Avancer will provide you with a replacement.
Need help?
Do you have a question about the AVSSK18VDA and is the answer not in the manual?
Questions and answers