2.1.2 - Back panel
2.1.2.1.1 - Power supply connector
The power supply is provided by the USB connector (6). Note that this is not a USB interface (connecting the
CM-MIDI to a USB host like a computer will not make it appear as a USB interface... at least for now...).
The CM-MIDI is powered by any USB charger able to provide 250mA.
IMPORTANT : Never connect the power input to any other kind of power supply! Always use the provided
USB charger or an equivalent model.
2.1.2.1.2 - MIDI IN 1
The MIDI IN port (7) is associated with RTP-MIDI endpoint 1. MIDI data received on this port are
transmitted to all partners which opened a session with endpoint 1.
2.1.2.1.3 - MIDI OUT 1
The MIDI OUT port (8) is associated with RTP-MIDI endpoint 1. The MIDI data transmitted by all partners
connected to this session are merged and transmitted to device connected to this port.
2.1.2.1.4 - MIDI IN/OUT 2
The second RTP-MIDI endpoint available in the CM-MIDI is linked to the connector labelled IN/OUT (9). The
selection between IN and OUT is done by internal jumpers. The configuration performed in factory is indicated in
the serial number sticker.
Page 13 of 33