Summary of Contents for Gastroback 98101
- Page 1 GASTROBACK ® Instructions for use Meat Grinder / Cookie Attachment Accessory Design Stand Mixer Advanced Read all provided instructions before first usage! Art.-Nr. 98101 Model and attachments are subject to change...
-
Page 2: Important Instructions
Carefully read all provided instructions before you start running the appliance and pay regard to the warnings mentioned in these instructions. Important Instructions • The appliance is designed for normal household quantities. Do not operate or store the appliance outdoors or in damp or wet areas. •... - Page 3 The Meat Grinder Attachment spanner for the ring nut 10. 2 litre storage container can be used as ring nut dust protection while storing the fine screen attachment or as meat tray when coarse screen processing meat. scrape 11. cookie attachment holder scroll 12.
- Page 4 Meat Grinder Attachment Operating Before first use of the Meat Grinder Attachment Remove all promotional materials and packing as well as any foreign objects, but do not remove the model label. Before first use and after a long period of storage, clean the processing tools in warm soapy water (see ´Care and Cleaning`).
- Page 5 5. Take the ring nut and screw it onto the thread of the housing turning it clockwise. You can use the spanner to securely tighten the ring nut (picture D/E). NOTE: Do not tighten the ring nut too much to avoid overwinding the thread.
- Page 6 WARNING: Always make sure that the appliance is turned ´Off` before plugging in the power supply. 3. Plug the power supply cable into a mains socket. WARNING: Never hold your face or other body parts over the feed chute when the motor is running because little pieces of food could be thrown out of the feed chute.
-
Page 7: Care And Cleaning
the provided spanner to loosen the ring nut. 5. Take the screen, scrape and the scroll out of the housing (picture B). Care and Cleaning Clean the appliance directly after use and do not leave any food dry on the surfaces of the appliance. -
Page 8: Troubleshooting Guide
5. Wipe the appliance and power cord with a damp soft cloth. Take care not to spill or drip water or any other liquids on the appliance. 6. Thoroughly dry the appliance and all parts of the appliance and attachment after each cleaning. - Page 9 The attachment moves or loosened while The attachment is not correctly assembled or not securely locked to operating. the attachment access. Turn the appliance ´Off` immediately. Operate according to the instructions ´Assemble the Meat Grinder Attachment`. The food leaks out at the side of the The ring nut is not screwed on tight enough.
- Page 10 4. Take the ring nut and screw it onto the thread of the housing turning it clockwise. You can use the spanner to securely tighten the ring nut (picture C). NOTE: Do not tighten the ring nut too much to avoid overwinding the thread.
- Page 11 3. Plug the power supply cable into a mains socket. WARNING: Never hold your face or other body parts over the feed chute when the motor is running because little pieces of food could be thrown out of the feed chute. Never push the food into the feed chute with your fingers or put foreign substances (hair, towels, cutlery) into the feed chute.
- Page 12 Dissemble the Meat Grinder Attachment 1. Switch ´Off` the appliance after use and disconnect the power supply cable from the mains socket. 2. Take the tray out of the feed chute. 3. Press down the attachment ejector (picture A) and pull the Cookie Attachment out off the access opening.
-
Page 13: Notes For Disposal
a few minutes in warm soapy water and use a nylon cleaning brush or cleaning sponge for cleaning. Rinse all parts with running water and dry them accurately. 4. Grease the scroll, cookie attachment and multi-shaped blade with salad oil to prevent air corrosion. - Page 14 Recipes Almond Cookies 125g soft butter 150g sugar 250g flour 1 small ground almonds 1/2 teaspoon baking powder lemon essence (optional) Cream butter and sugar together using the beater until the mixture is light and fluffy. Beat in egg, then fold in the sifted flour, baking powder, nuts and lemon essence. Pass the mixture through the attachment, having selected the desired shape and cut into length.
- Page 15 Accessories for the Design Stand Mixer Advanced You will get the accessories from your specialty retailer. Pasta Maker Attachment Art.-Nr.: 98100 Meat Grinder / Cookie Attachment Art.-Nr.: 98101 Food Slicer/ Shredder Attachment Art.-Nr.: 98102 Additional stainless steel bowl Art.-Nr.: 98103...
- Page 16 GASTROBACK GmbH Gewerbestraße 20 • D-21279 Hollenstedt/Germany http://www.gastroback.de • E-Mail: info@gastroback.de...
Need help?
Do you have a question about the 98101 and is the answer not in the manual?
Questions and answers