Related Manuals for EluneVision In Ceiling Motorized
Summary of Contents for EluneVision In Ceiling Motorized
- Page 1 Screen Casing Dimension In Ceiling Motorized Projection Screen Product Manual Th e screen fl ange or metal fl ange is the 20mm wide all around the screen...
- Page 2 Parts List Controller Diagram Ceiling Mounting Washers, QTY 8 Bracket, QTY 2 1 Meter Long Steel Threaded Rods 8MM diameter, QTY 4 Nuts, 8MM diamter, QTY 16 Wall Switch Connector 2 Remotes, IR and RF 5M Low Voltage Wire for Wall Control Panel 12V Trigger Connector 3M Low Voltage 12V Trigger...
- Page 3 Th is procedure is designed as a general guide on how to install the screen. Diff erent circumstances may require diff erent installation meth- ods. EluneVision recommends that installation is left to installation professionals. It is recommended that the screen is anchored onto a concrete ceiling or joists for safe operation using 8mm screws/anchors.
- Page 4 Installation Procedure Installation Procedure Attach the screen to the ceiling, as shown in the diagram below, and use Ceiling Opening Needed: the 8mm nuts that come with the screen. Make the ceiling bracket lines up with the screen and everthing is properly fi xed. Install ceiling mounting brackets as shown in the diagram below.