Page 1
Advanced Technology: with exclusive patented technology, high- • temperature and high-pressure steam is used for clearing away dirt and stains on floor boards, windows, doors and clothes. The unit will also kill bacteria on surfaces, while being completely environmentally friendly. Improved Safety: To ensure that the unit avoids empty heating, once the •...
Page 2
Do not allow children to use this machine. Keep the unit out of reach of • children when not in use. This device is not intended for use by persons (including children) with • reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person who is responsible for their safety.
Page 3
Power supply rating: AC 220-240V~ 50Hz Tank capacity: 300ml Max capacity of water cup: 175ml Rated power: 900W ~ 1050W Steam pressure: 2.5 ~ 4.2bar Injected steam capacity: 28g/min Overall dimensions: 250 x 140 x 230mm Net weight: 1.85kg 1. Unpack the product, check accessories and make sure all parts are present and undamaged.
Page 4
Hold the pipe section of the long spray cup in your hand, aligning the arrow on the spray cup with the single-line mark on the short spray nozzle on the machine body, then insert the spray cup into position. Rotate the spray cup in a clockwise direction, aligning the arrow on the spray cup with the double-line mark on the short spray nozzle on the machine body, as shown in Figure 1.
Page 5
As shown in Figure 4 and Figure 5, install the two small hooks of the spray cup for doors/windows, then connect the trigger for the big hook. Then push the spray cup for doors/windows up and attach it onto the body of the general spray nozzle.
Need help?
Do you have a question about the CTSTMCLN900A and is the answer not in the manual?
Questions and answers