Switching On; Switching Off; Reset - Microgate WITTY User Manual

2.1.1 S O
WITCHING
To switch on the Witty timer press the <Microgate> key. After a few seconds required by the boot loader,
a screen is displayed showing the installed firmware version. Press any key to go to the Main Menu.
2.1.2 S O
WITCHING
From any screen press the <Microgate> key and hold it for 5 seconds.
Another screen prompts to confirm switching off the timer. Press <F1> to confirm or <F4> to cancel.
2.1.3 R
ESET
If the timer does not respond to any command, press the <Microgate> key and hold it for at least 10
seconds. When the key is released, the device will be reset and switched off. Press the key again to switch
on.
Microgate Srl
N
FF
P. 8 / 89