Summary of Contents for Audio Specialties Group MAS-538
- Page 1 Audio Specialties Group Products Division MAS-538 Single Channel Transmit Amplifier QUICK START GUIDE REV-0...
- Page 2 Audio Specialties Group and any of its vendors, dealers or representatives forbid the use of this product in any way that is contrary to FCC Regulations. Utilizing this product in a manner which is contrary to FCC Regulations is expressly forbidden.
- Page 3 2-Hz rate. This is the heartbeat of the micro-controller and should always be in this state during normal operation. The MAS-538 does not energize the DC supply current to the RF Amplifier sub-system on initial power-up. This prevents possible safety concerns which could arise from un-planned power outages.
- Page 4 The indicator will only flash if the ON state has been activated and the fuse is blown. Cautions: The MAS-538 is capable of 5-watts of RF power output +37dBm into a 50-ohm load. Exercise caution when connecting this amplifier to other equipment. Verify that the cabling is fault-free and that the other equipment is capable of withstanding this level of RF energy.
Need help?
Do you have a question about the MAS-538 and is the answer not in the manual?
Questions and answers