Advertisement
RF Wireless LED Dimmer
Model:SR-2801E with SR-2501N series
Feature
Reliable stable switch and dimming control function,control range≥20M.
Battery in the remote is with long life span. It normally can use for 2 years.
Switch on/off of lightings slowly, without any flash, meet the comfort of human eyes.
Dimming range 0.1-100%.
Use with power repeater to expand the output power unlimitedly.
Enable to control receiver's 4 output channels separately.
Push dim function
Product introduction
The SR-2801E and its receiver is a RF Wireless LED Dimmer. It lets you individually control 4 channels
independently.
Parameter
Remote
Operation Voltage
Part No.
SR-2801E
3VDC
Receiver
Iuput Voltage
Part No.
SR-2501N
12-36VDC
SR-2501NEA
12-36VDC
SR-2502N
12-36VDC
SR-2503N
12-36VDC
Product Size
136.5
DIMENSIONS
Operation
Frequency
ø/h (mm)
434MHz/868MHz
40x136.5x11.5
Current
Output
4x5A
4x(60-180)W
Constant voltage
4x8A
4x(96-288)W
Constant voltage
4x350mA
4x(4.2-12.6)W
4x700mA
4x(8.4-25.2)W
Wiring diagram
1)Receiver Connection Diagram for Single Unit
GND
GND
2)
Receiver
Connection Diagram for Multiple Units
REMARKS
RF Wireless
GND
Remarks
GND
Constant current
Constant current
GND
Power Supply
110V-230VAC
12-36VDC
SR-2501N
RF Easy Dimmer
Learning Key
4x5A
PUSH
Power Supply
110V-230VAC
12-36VDC
SR-2501N
RF Easy Dimmer
Learning Key
2x10A
Power Supply
110V-230VAC
12-36VDC
SR-2501N
RF Easy Dimmer
Learning Key
SR-2501N
RF Easy Dimmer
Learning Key
SR-2501N
RF Easy Dimmer
Learning Key
Single color LED strip
Single color LED strip
Single color LED strip
Single color LED strip
Power Supply
110V-230VAC
12-36VDC
SR-2501N
RF Easy Dimmer
Learning Key
GND
1x20A
Single color LED strip
Single color LED strip
Single color LED strip
Single color LED strip
Single color LED strip
Single color LED strip
Single color LED strip
Single color LED strip
Single color LED strip
Single color LED strip
Single color LED strip
Single color LED strip
Advertisement
Table of Contents
Summary of Contents for LedSpot SR-2801E
-
Page 1: Wiring Diagram
Enable to control receiver’s 4 output channels separately. 2x10A Push dim function Receiver Connection Diagram for Multiple Units Product introduction The SR-2801E and its receiver is a RF Wireless LED Dimmer. It lets you individually control 4 channels Power Supply 110V-230VAC 12-36VDC independently. Parameter... - Page 2 Safety & Warnings Operation After you have wired all the receivers according to Figure illustration you need to do the following: 1) The product shall be installed and serviced by a qualified person. 2) IP20.Please avoid the sun and rain. When installed outdoors, please ensure it is mounted in a water proof 1.
Need help?
Do you have a question about the SR-2801E and is the answer not in the manual?
Questions and answers