Brica roll ’n go Quick Manual

B
A
C
D
H
L
To Use
1. With transporter in upright position, unfold wheels by depressing
and then sliding each blue wheel lock button toward outside of
unit. The wheel will self deploy and lock into place. Check that the
wheel lock safety indicator has turned completely green.
IMPORTANT: In addition to the wheel lock indicator turning green,
an audible "click" should be heard when each wheel has reached
its fully open and locked position. You may need to manually open
wheel until the click is heard to ensure wheel is locked in open
position. DO NOT operate if wheels are not in the fully open and
locked position.
2. Unfold base platform until it is fully open.
NOTE: Your transporter can stand in this open position
roll 'n go
™
car seat transporter
A. Handle
B. Push release button
C. Attachment strap
D. Slider adjustment
E. Ratchet ladder strap
F. Ratchet buckle
G. Ratchet release tab
I
H. Carry handle
J
I. Tether attachment point
E
J. Wheel safety lock button
F
K. Wheel lock safety indicator
G
K
L. Base platform
65005
Questions?
1.866.869.8257
brica.com
©2012 BRICA, Inc. 500 West 5th Street,
Suite 220, Charlotte, NC 28202
Retain this address for future reference.