Memorex MB2059D User Manual page 11

OPERATION
3
Press the REC/STOP button and the REC
indicator will light and the elapsed time will
appear. Speak into the built-in microphone or
insert a microphone into the MIC jack and when
the unit picks up sound, it will record. When
not recording, the REC indicator will blink and
PAUSE will blink in the display until sound is
detected. Press the REC/STOP button again to
stop recording.
3
NOTES:
• The first few sounds activate the recorder and
may not be recorded.
• A variation in voice level during recording will
not stop the unit, two seconds of silence is
required to stop the recording.
• For constant recording, see page 16.
• To pause, press the MODE/PAUSE button.
• The built-in audio level automatically sets the
recording level.
• For normal voice levels, a distance of 5-9
inches is appropriate.
19
OPERATION
TO PLAY BACK MESSAGES
1
While in Standby mode, select a File Folder
by pressing the FILE/TIME button (see page 14).
2
1
1
Select the desired message number by pressing
the REV 1 or FWD 2 button; the message
number and the message length will appear in
the display.
2
20