JVC KD-AR959BS Instruction Manual page 17

MIC LEVEL
–20 — +08 (0): The sensitivity of the microphone increases as the
number increased.
NOISE RDCT –05 — –20 (–10): Adjust the noise reduction level until the least
noise is being heard during a phone conversation.
ECHO CANCEL 1 — 10 (4): Adjust the echo cancellation delay time until the least
echo is being heard during a phone conversation.
Bluetooth mode operations
1
Press to enter Bluetooth mode.
2
Turn the volume knob to make a selection (see the following table),
then press the knob.
3
Press MENU to exit.
To return to the previous setting item or hierarchy, press G PTY.
1 Press the volume knob to select a name or a phone number.
RECENT CALL
• ">" indicates call received, "<" indicates call made, "M" indicates
call missed.
• "NO HISTORY" appears if there is no recorded call history or call
number.
2 Press the volume knob to call.
1 Turn the volume knob to select a name, then press the knob.
PHONEBOOK
2 Turn the volume knob to select a phone number, then press the knob to
call.
• If the phone supports PBAP, the phonebook of the connected phone is
automatically transferred to the unit when pairing. If the phone does
not support PBAP, "SEND P.BOOK MANUALLY" appears. Transfer the
phonebook manually. ( 17, P.BOOK WAIT)
• This unit can display only non-accent letters. (Accent letters such as "Ú"
is showns as "U".)
• If the phonebook contains many contacts, ( 16, Select a contact by
name).
JS_JVC_KD_AR959_J_f_EN.indd 15
Default: XX
DIAL NUMBER
VOICE Speak the name of the contact you want to call or the voice command to
control the phone functions. ( 16, Use Voice Recognition)
SETTINGS
AUTO ANSWER
RING TONE
RING COLOR
(for
KD-AR959BS /
KD-R950BT)
MSG NOTICE *
* Functionality depends on the type of the phone used.
1 Turn the volume knob to select a number (0 to 9) or character ( , #,
+).
2 Press S / T to move the entry position.
1 2
Repeat steps and until you finish entering the phone number.
3 Press the volume knob to call.
01 SEC — 30 SEC: The unit answer incoming call automatically in the
selected time (seconds). ; OFF: Cancels.
IN UNIT: The unit rings to notify you when a call/text message comes in.
(Default ring tone is different according to the paired device.)
• CALL: Selects your preferred ring tone (TONE 1 — 5) for incoming
calls.
• MESSAGE: Selects your preferred ring tone (TONE 1 — 5) for
incoming text messages.
IN PHONE: The unit uses the connected phones' ring tone to notify you
when a call/text message comes in. (The connected phone will ring if it
does not support this feature.)
COLOR 01 — COLOR 29 (COLOR 06): Display zone will change to
the selected color during a call or when a text message comes in. ;
OFF : Cancels.
ON: The unit rings and "RCV MESSAGE" appears to notify you of an
incoming text message. ; OFF: Cancels.
BLUETOOTH®
Default: XX
ENGLISH | 15
12/16/2013 11:52:12 AM