6. Tap
List to display a list of current recordings.
7. Tap
Recording quality to adjust the recording
quality. Choose from: Normal or High quality recording.
8. From the Recorded files page, tap
select one of the following:
• Share via: Select one or more files and then select a method to
use to share this audio file. Selections are: Add to Dropbox,
Bluetooth, Drive, Email, Gmail, Messages, or Wi-Fi Direct.
Refer to each specific section, depending on the method you
selected to send this voice recording.
• Delete: allows you to delete one or more voice recordings. Tap
the recordings to delete and tap Delete.
• Settings: the following settings are available:
–
Storage: allows you to choose where your recordings will be
saved. Select between Device or memory card.
–
Recording quality: allows you to set the recording quality to
High or Normal.
179
Menu and then
–
Limit for multimedia messages: allows you to select On or
Off. If you Limit for MMS by selecting On, recording size will be
limited to what can be sent in a multimedia message.
–
Contextual filename: (requires GPS tagging) allows you to
adjust the filename based on contextual information such as
your current GPS location.
–
Default name: allows you to choose the name prefix for your
recordings. For example, if your Default name is Voice, your
recordings would be named Voice 001, Voice 002, and so on.
–
Noise reduction: allows you to activate/deactivate background
noise suppression.
–
Recording volume: allows you to assign the ambient noise
quality of your current location so the device can better detect
audio. Choose from High or Low.
–
Channel: allows you to assign recording mode to either Mono
or Stereo.
–
Skip interval: allows you to assign a skip length.
• End: allows you to exit the application.