Advertisement
Owner's Instructions SKYWATCH
You have just acquired a high precision instrument, manufac-
tured using the most up-to-date technology. The Skywatch
was designed to handle intense use and extreme condi-
tions. Please take the time to carefully read your instructions so
as to understand all the great features this unit has to offer.
Buttons Uses :
Turn your
button.
Push the wind button to choose between maximum or average
wind speed.
Press and hold the wind button to switch the wind speed
measurement unit: km/h, m/s, knots or mph.
Push the mode button to choose between current temperature,
WindChill Factor, pressure, pressure historical records and
altitude.
Press and hold the mode button to switch temperature unit:
˚C or ˚F.
Extreme values of wind speed and temperature can be deleted
by pressing both the wind and mode buttons simultaneously.
Push the clock button to set the clock timer.
Current Temperature :
The temperature sensor is located on the left corner, over the
display. In the event of severe temperature changes, allow a
few moments for the sensor to reach the current temperature.
Select the current temperature with the mode button. Current temperature is displayed
at the bottom of the LCD either in ˚C or ˚F. To change the unit of measurement, press
the mode button for 2 seconds.
Please note that holding the instrument in your hands for a while may influence the
temperature reading. The sensor is very sensitive.
on by pushing either the wind or mode
®
Geos
1 2 3
1. Button wind
2. Button clock
3. Button mode
All segments
of the LCD
Advertisement
