Do you have a question about the ZA-180 and is the answer not in the manual?
Questions and answers
John Sutton
April 28, 2025
No lights illuminate after power button is pressed. Blue light illuminates permanently if plugged into PC USB port. In that case when powering up the red light illuminates for only an instant and the blue light remains on permanently.. Have tried resetting. No change.
1 comments:
Mr. Anderson
May 15, 2025
If the Zartek ZA-180 does not power on and only the blue light stays illuminated when connected to a PC USB port, the battery may be in protection mode due to very low power. In this case, charge the device fully using the supplied USB cable. Once fully charged (about 2 hours), the blue light will turn off, and the device should function normally.
This answer is automatically generated
Summary of Contents for Zartek ZA-180
Page 1
Zartek ZA-180 User’s Manual Thank you for buying the Zartek mini DV video recorder. In order to ensure personal safety and efficiency of the product, please read this manual carefully before operating. Keep the manual for future reference. For any queries please contact Zartek via email: info@zartek.co.za...
Contents Product layout……………………………………..………………………………………………………………..…1 I Features and Specifications…………………………………………………………………………………..2 II Operation Guide……………………………………………………………………………………………….……3 1. Charging……………………………………………………………………………………………………3 2. Powering on & recording…………………………………………………………………….…….3 3. Sound activated recording…….…………………………………………………………………..4 4. Time/date stamping..………………..………………………………………………………..…….4 5. Powering off……………………………………………………………………………………….……..5 6. Auto-power off function…………………………………………………………………….………5 7. Connecting to a computer……………………..…………………………………………..……..5 8. PC camera…………………………………………………………………………………………..…….5 9. Reset…………………………………………………………………………………………………..…….6 10.
Thank you for purchasing the Zartek Mini DV video recorder. It has an ultra-portable design with a clip for easy mounting. Recording is simple whether doing action, extreme, fun or security activities. Product layout: : : : Bracket...
I Features • Mini video recorder with clip • Records video and audio • High speed recording with quick light response • High resolution image 2 Megapixel vcolor CMOS • Video output 720x480 pixel and 30 frames/second • Micro SD card slot (max 16GB supported) •...
II Operation Guide 11. Charging The device is fitted with a built-in lithium rechargeable battery, so when you use it for the first time, please charge fully. The method for charging as following: 1.) Connect computer: use supplied USB cable to connect to the computer’s USB port. 2.) Use USB adaptor (not included): connect charger plug with USB cable, then plug into electrical connector receptacle, it can be charged.
• Saving file operation needs some time, so please don’t press any operation button continuously in order to avoid corrupt saving and generating an incomplete file. • When making a video, clarity will depend on light levels and video stability. Picture may become distorted if the lighting level is low and the device is moved excessively.
5. . . . Power off Press the Power button for 3 seconds and the device will switch off. If the device is turned off during a video recording, the video file will be saved automatically first. 6. Auto-power off function •...
9. . . . Reset If the device freezes up or does not operate properly it may need to be reset. Use a fine point such as a pin to press the Reset button located on the side of the device. 10.
Need help?
Do you have a question about the ZA-180 and is the answer not in the manual?
Questions and answers
No lights illuminate after power button is pressed. Blue light illuminates permanently if plugged into PC USB port. In that case when powering up the red light illuminates for only an instant and the blue light remains on permanently.. Have tried resetting. No change.
If the Zartek ZA-180 does not power on and only the blue light stays illuminated when connected to a PC USB port, the battery may be in protection mode due to very low power. In this case, charge the device fully using the supplied USB cable. Once fully charged (about 2 hours), the blue light will turn off, and the device should function normally.
This answer is automatically generated