Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Summary of Contents for LONGEVITA FS-100
- Page 1 Infrared Forehead Thermometer Instruction manual Model: FS-100 0120...
- Page 2 NSTRUCTION BEFORE USING PRODUCT • Use this product only for its intended purpose as described in this manual and read through the manual before initial use. • The measurement by this product does not represent doctor's medical examination. • Consult with doctors if any abnormality found. •...
- Page 3 NSTRUCTION MANUAL 1. Press the Power/Measure button. 2. The LCD is activated showing all symbols. Then latest measurement value is displayed for a second. 3. When the ready symbol is displayed, thermometer is ready to measure. 4. Place the probe on the forehead and flat to the skin firmly. Depress the measure button throughout measurement.
-
Page 5: Cleaning And Keeping
LEANING AND KEEPING • Sensor in front of the probe is extremely sensitive part. For accurate measurement, always keep it clean and not damaged. • Place the sensor facing the below to prevent any liquid dropped on the sensor. Carefully clean the sensor using cotton-stick with alcohol. -
Page 6: Indications Of Errors
NDICATIONS OF ERRORS Q. Outside temperature is below 10C(50F) or above 40°C (104°F) A. Place the product where temperature is between 10°C (50°F) and 40°C (104°F) Q. Measured object is above 42.2°C (108.0°F) A. Recheck the measured object before measuring. (Extremely hot object cannot be measured) Q. -
Page 8: Battery Change
ATTERY CHANGE One lithium battery is installed in a product when produced. When is displayed on LCD, replace the battery through following steps. Pull the battery compartment and pull the pin holding the battery in arrow direction. Place the new battery in shown “+” mark. Close the battery compartment. - Page 9 EMPERATURE UNIT CONVERSION (°C °F) Push away the battery compartment and press the indicated button for a second. Then temperature unit will be converted.
-
Page 10: Product Description
RODUCT DESCRIPTION Probe Sensor Probe LCD Display Screen Power/Measure button Battery Compartment RODUCT SPECIFICATION Item Description Measurement method: Infrared measurement 20 (68.4)~42.2°C 108.0°F) Temperature range: ±0.2°C (±0.4°F):20~42.2°C Accuracy: (68.4~108.0°F) Display type: LCD(Liquid Crystal Display) Power save mode: Automatic shutdown after 1 minute Battery: CR2032(1EA) about 6,000...