Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for StarLeaf 2120
Summary of Contents for StarLeaf 2120
- Page 1 Quick Start The StarLeaf Phone...
-
Page 2: Installing Your Phone
Installing your phone Before installing your phone, refer to the safety information at: www.starleaf.com/safety. Step 1: Connect the phone base Connect the base to the body of the phone. - Page 3 Step 2: Connect the handset Using the supplied handset cable, connect the handset of the phone to the handset port on the rear of the phone. The handset port is marked with this symbol: Handset port...
-
Page 4: Step 3: Connect To The Network
For Personal Telepresence: Connect the other end of the cable to an Ethernet port in your network • For Group Telepresence: Connect the other end of the cable to the StarLeaf Phone connector on the Group Telepresence system Network port... - Page 5 Step 4: Connect to the power Use the AC/DC adaptor to provide power to the phone. Connect the adaptor to the DC +48V port and then connect the adaptor to the mains power supply using the power cable supplied with the adaptor. DC +48V port Note: If you have connected the phone to Group Telepresence or...
- Page 6 Step 5: Connect to StarLeaf telepresence You will use the StarLeaf Phone to control one of: • StarLeaf Group Telepresence • StarLeaf Personal Telepresence Refer to the documentation accompanying that system to complete the installation. Tip: Use the cable guides Using the cable guides to channel your cables through the base of the phone will allow your phone to sit firmly on your desk.
- Page 7 StarLeaf Quick Connect When you power the phone for the first time, if it displays the StarLeaf quick-connect screen (shown below), enter your quick-connect code. If you do not have one, contact your reseller or StarLeaf technical support. When you have entered the quick-connect code, the StarLeaf Phone will check if there is an upgrade available.
-
Page 8: Features Of The Phone
Features of the phone The diagram below shows the physical features of the StarLeaf Phone. Message waiting indicator Audio volume down Audio volume up Headset USB port for supported devices Speaker Keypad Audio mute Home button Video mute Microphone location... -
Page 9: The Home Screen
The Home screen The StarLeaf Phone screen is a touch screen. Press the buttons on the screen to control the phone. Press the Home button at any time to see the Home screen. The picture below shows you what you might see on your Home screen. - Page 10 Where to find more information or get help For more information about using the StarLeaf Phone, refer to the Phone User Guide. All StarLeaf documentation is available from the StarLeaf web site at http://support.starleaf.com/documentation. You or your reseller can get help from our support team by raising a case at http://support.starleaf.com.
-
Page 11: Legal Information
StarLeaf Limited. StarLeaf Limited reserves the right to revise this documentation and to make changes in content from time to time without obligation on the part of StarLeaf Limited to provide notification of such revision or change.
Need help?
Do you have a question about the 2120 and is the answer not in the manual?
Questions and answers