Page 1
Efforts have been made to ensure the accuracy and reliability of the data contained in this publication; however, Citygrow Energy Systems Limited. makes no representation, warranty, or guarantee in connection with this publication and hereby expressly disclaims any liability or responsibility for loss or damage resulting from its use or from the use of any product or methodology described herein;...
CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK) NO USER-SERVICEABLE PARTS INSIDE REFER SERVICING TO QUALIFIED SERVICE PERSONNEL The lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of uninsulated “dangerous voltage”...
It is a powerful and handy device that enable you to control your house, eg. Lighting control, curtain control, air-conditioner control, IR device control. Before you use CG102RV3, you should have already installed various kind of Citygrow’s ZigBee/IR control product. You may locate CG102RV3 at different locations within your house for example, living room, dining room, bedside, ………..etc.
2. Understanding of the product-CG102RV3 Total 12 control buttons Plug in the provided USB cable CG101UTU 1. For battery recharge USB cover 2. For programming...
3. Getting start 3.1. Make sure that you have already installed Citygrow’s ZigBee products in your house. (refer to the user manual of each Citygrow’s product) 3.2. Make sure that you have already preprogrammed Citygrow’s ZigBee products in your house (refer to the user manual of each Citygrow’s product) 3.3.
4.1. Press the Control button once to select the “lighting scene” that you have preset. 4.2. After pressing the button, CG102RV3 will send radio signal to the surrounding Citygrow’s wireless product, for example the wall mount type mood control panels, switch module, dimmer, curtain motor driver, AC power socket……..etc 4.3.
Page 8
5. Battery recharge 5.1. Open the USB cover at the front of the product. 5.2. Use the provided USB cable to plug into the USB port at the USB cover area. 5.3. The other side of the USB cable should be plugged into DC5V ( minimum 0.1A) type USB charger, for example the mobile phone USB charger or USB port of a computer.
Need help?
Do you have a question about the CG102RV3 and is the answer not in the manual?
Questions and answers