EyeSpyPro MISER Operation Manual

MISER
telephone scrambling
system
OPERATION MANUAL
Package Checklist
Accessories
1. An Operating Manual.
2. A 110 Volts AC Power adapter (Figure 1).
3. A Telephone Line cord with both sides phone
jack (Figure 2).
4. A special off-line secure code setting cable
(Figure 3).
Figure 1
Figure 2
Figure 3
Page 3 of 15
** PRECAUTIONS **
•
Operate the unit only on 9 VDC.
•
For AC operation, use the supplied AC power
adapter with unit. Do not use any other AC
power adapter. For battery operation, use the 9
VDC battery recommended for this unit only.
•
Disconnect the AC power adapter from the wall
outlet when it is not to be used for an extended
period of time.
•
When the device is not to be used for a long
period of time or is to be operated extensively
on AC current, remove the battery to avoid
device damage from battery leakage.
•
Do not place the device in a location near heat
sources such as radiators or in a place subject
to direct sunlight.
Should any liquid or solid object fall into the
device, unplug the device and remove the
battery, and have the device checked by
qualified personnel before operating it any
further.
Page 2 of 15
Installation Instructions
Installation procedure
1. Plug the AC adapter to AC power outlet
(Figure 4).
2. Connect the other adapter end to Miser DC 9V
jack (Figure 4).
Figure 4
Page 4 of 15